Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Mahindra › 3316

Mahindra 3316

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Mahindra 3316 is a machine built by Mahindra. The engine delivers 33 hp (25 kW), has 3 cylinders. The engine comes from Mitsubishi. Rated speed is 2,500 rpm. The engine is water-cooled. The model was built in Japan. The fuel is diesel. The engine fitted is the S3L3. The gearbox offers 8 forward gears. There are also 8 reverse gears. The linkage is category III. The PTO runs at 540 rpm. Rated output across the Mahindra range ranges from 18 to 83 hp; the 3316 sits in the lower part of that range with 33 hp. Its immediate neighbours are the 3215 below it with 32 hp and the 3510 HST above it with 34 hp. Rated output across the Mahindra range ranges from 13 to 62 kW; here the 3316 sits in the lower part of that range with 25 kW. 222 Mahindra models across 9 series are on record.

Mahindra – other models: the collective page of the Indian tractors outside the named ranges, from the 265 DI and 275 DI through the 475 DI, 575 DI and Bhoomiputra to the North American 1815 HST to 4035 and the compacts, 13 to 60 kW, Mahindra, Mitsubishi and Daedong engines

This page gathers the Mahindra tractors the register could not assign to a named range – the Mumbai maker that began in 1963 under licence from International Harvester with the B-275, has been the world's largest tractor maker by units since 2010 and also serves the North American compact market through its subsidiary Mahindra USA in Houston. The type logic of the Indian models: the three-digit number gives roughly the hp class with a doubled tens digit – 265 DI about 30 hp, 275 DI about 35 hp, 475 DI about 42 hp, 575 DI about 45 hp – DI the direct injection, TU a transmission variant, XP Plus and SP Plus the equipment lines, Bhoomiputra and Sarpanch the special models for the Indian market; the four-digit types of the North American ranges (1815, 2015, 2615, 3015, 4035) give the range and power in the first digits, HST the hydrostat, Gear the manual gearbox. The engines are Mahindra's own three- and four-cylinder diesels in the Indian models, Mitsubishi in the small and Daedong and own engines in the larger compacts, which Mahindra partly sources from Mitsubishi Agricultural Machinery in Japan, in which the group holds a stake.

Read on 3 more paragraphs

The register lists here 120 versions with 13 to 60 kW from three- and four-cylinders at 1,650 to 2,800 rpm and lift capacities from 1,000 to 1,640 kg on the recorded models.

Mahindra is the dominant tractor brand in India with over 40 percent market share and, since the 2000s, the second-largest supplier of compact tractors in the USA after Kubota, against John Deere and Kioti.

On used Indian models, engine, clutch and brakes (simple, repair-friendly technology) count, on the compacts operating hours, hydrostat, front loader and four-wheel-drive clutch; parts run through Mahindra dealers, in Europe through importers.

Sources: Kennwerte der Modelle Mahindra (weitere Modelle), Mahindra Tractors (Hersteller, Mumbai)

Technical data

Engine

Engine makeMitsubishicorrect
Engine modelS3L3correct
Fueldieselcorrect
Power33 hp (25 kW)correct
Rated speed2,500 rpmcorrect
Cylinders3correct
Displacement1,496correct
Coolingwater-cooledcorrect

Drivetrain and chassis

Driveselectable four-wheel drivecorrect
Forward gears8correct
Reverse gears8correct

Origin and approval

PlantJapancorrect

Other data

Linkage categoryCat IIIcorrect
PTO speed540correct

More machines with this engine (Mitsubishi S3L3, 2)

Frequently asked questions

How much power does the Mahindra 3316 have?

The Mahindra 3316 delivers 33 hp.

What engine does the Mahindra 3316 have?

3 cylinders, Diesel.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 17 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare