StartHarvesting machineryMacDon › M155

MacDon M155

Series: MacDon Swather

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The MacDon M155 belongs to the MacDon Swather series. Rated speed is 2,300 rpm. Top speed is 26.1 km/h. The tank holds 367.2 litres. The hydraulic tank holds 65.1 litres. The engine fitted is the QSB4,5. 9 MacDon models across 2 series are on record. The model is listed under Harvesting machinery. 5 verified figures from 1 source are on file.

Technical data

Engine

Engine modelQSB4.5correct
Rated speed2,300 rpmcorrect

Drivetrain and chassis

Top speed26.1 km/hcorrect

Working data

Hydraulic oil capacity65.1 lcorrect
Fuel tank capacity367.2 lcorrect

Frequently asked questions

How fast does the MacDon M155 go?

Top speed is 26.1 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Combine harvester in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare