M & V N4TG32
Built: 2010-2010 · Series: Other models
More machines from model year 2010
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
M & V – other models: heavy semi-trailers for earthmoving and heavy-load haulage outside the named ranges, 18 versions, unladen weight 4,000 to 9,350 kg, gross vehicle weight up to 48.9 tonnes
M & V is a manufacturer of heavy semi-trailers and trailers for earthmoving and heavy-load haulage. This collective page gathers versions the register could not assign to a narrower range, with alphanumeric type codes such as N06G31 or N4TG32 marking internal size and axle configurations.
Read on 3 more paragraphs
The register lists here 18 versions with unladen weights from 4,000 to 9,350 kg, gross vehicle weights from 13,500 to 48,900 kg, lengths from 8,500 to 13,940 mm and widths from 2,250 to 2,550 mm.
With gross weights up to almost 49 tonnes, the vehicles sit in the multi-axle heavy-trailer segment used in earthmoving, building-material haulage and gravel extraction in tipper and skip combinations behind tractor units, a market segment served alongside Kässbohrer and Meiller by numerous specialised small-series manufacturers. For use in quarries or on unpaved construction sites, the frame and axles are correspondingly reinforced, which is also reflected in the comparatively high unladen weight of the range.
When buying used, check the axle assemblies and braking system (wear, tightness of the brake cylinders), the condition of the load platform or skip (rust-through, deformation from bulk material), the kingpin and hitch, and the tyres and rims. Spare parts usually run through specialised heavy-vehicle and trailer workshops.
Technical data
Dimensions and weights
| Length | 12,500 mmcorrect |
|---|---|
| Width | 2,500 mmcorrect |
| Wheelbase | 9,200 mmcorrect |
| Unladen weight | 6,350 kgcorrect |
| Gross vehicle weight | 36,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the M & V N4TG32 weigh?
The unladen weight is 6,350 kg.
What is the gross vehicle weight of the M & V N4TG32?
36,000 kg.
Up to what speed is the M & V N4TG32 approved?
Approved up to 100 km/h.
What are the dimensions of the M & V N4TG32?
12,500 mm × 2,500 mm.
When was the M & V N4TG32 built?
Production years: 2010.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.