M&g MAC 27B
Built: 1998-1998 · Series: Other models
More machines from model year 1998
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
M&G – other models: the collective page of trailers outside the named ranges, from the DFB08C to the SMB18Y, 1,970–16,120 kg unladen weight, 8,000–39,000 kg gross weight
This page gathers the trailers and semi-trailers of the M&G brand that the register could not assign to a named range. The seven types listed run from the DFB08C and SMB18Y through the FAC27Y to a model described as SEMI TRAILER, covering both smaller trailers and heavy semi-trailers. By gross weight the types spread across EU vehicle classes O3 and O4. Within class O3, a stronger overrun brake or an air braking system with a category BE or C1E licence still suffices; the heavy class O4 semi-trailers, by contrast, require air brakes with ABS or EBS and a category CE licence without exception.
Read on 3 more paragraphs
The register lists here 7 versions with unladen weights from 1,970 to 16,120 kg and gross weights from 8,000 to 39,000 kg. Length runs from 6,800 to 14,050 mm, width from 2,450 to 2,550 mm.
The wide span from just under 2 to over 16 tonnes unladen weight shows that this collective page covers both lighter trailers for in-house and regional transport and heavy semi-trailers for long-distance haulage; what they share is a design built for high payload.
On a used purchase, the condition of chassis and axles, the braking system and overrun coupling or fifth-wheel coupling, corrosion on load-bearing parts and tyre wear all count; spare parts for the smaller and the heavier types alike run through the open trailer-parts trade. On the multi-axle versions, a tandem or tridem axle group spreads the load onto the tyres more evenly than a single axle, which spares the axle bearings especially on the heaviest types on this page.
Sources: Kennwerte der Modelle M&G
Technical data
Dimensions and weights
| Length | 13,910 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 9,010 mmcorrect |
| Unladen weight | 8,520 kgcorrect |
| Gross vehicle weight | 36,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the M&g MAC 27B weigh?
The unladen weight is 8,520 kg.
What is the gross vehicle weight of the M&g MAC 27B?
36,000 kg.
Up to what speed is the M&g MAC 27B approved?
Approved up to 100 km/h.
What are the dimensions of the M&g MAC 27B?
13,910 mm × 2,550 mm.
When was the M&g MAC 27B built?
Production years: 1998.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.