Start › Electric motors › Lowara › PLM4100B35/330 E3

Lowara PLM4100B35/330 E3

Series: Other models

The photo shows the 130646360 from the same series. Source: https://lowara.su/2016/12/20/lowara-co-2/

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The PLM4100B35/330 E3 from Lowara is a three-phase induction motor. The rated output is 3 kW. The motor is four-pole, which at 50 Hz gives a synchronous speed of 1,500 rpm. The housing is frame size 100. The protection class is IP55. The efficiency is 88 per cent at full load, 88.1 per cent at 75 per cent load and 86.6 per cent at half load. Mounting arrangements to IEC 60034-7: B3, B5, B14, B34 and B35. Stated countries of manufacture: Poland and Italy. The values are recorded in the Australian MEPS registration under the GEMS Determination 2019; measured to IEC 60034-2-1 (Edition 2.0). Rated output across the Lowara range ranges from 0.75 to 22 kW; the PLM4100B35/330 E3 sits at the bottom of that range with 3 kW. Its immediate neighbours are the PLM90B35/322 E3 below it with 2.2 kW and the 130646320 above it with 4 kW. 43 Lowara models are on record. The model is listed under Electric motors. 21 verified figures from 1 source are on file.

Technical data

Engine

Rated output3 kWcorrect

Electrical data

Number of poles4correct
Protection classIP55correct
Frame size100correct
Mounting (IEC 60034-7)B3, B5, B14, B34, B35correct
Efficiency at full load88 %correct
Efficiency at 75 % load88.1 %correct
Efficiency at half load86.6 %correct

Origin and approval

Country of manufacturePoland, Italycorrect
Standard appliedGreenhouse and Energy Minimum Standards (Three Phase Electric Motors) Determination 2019correct
Test methodIEC 60034-2-1 (Edition 2.0)correct

Frequently asked questions

How much power does the Lowara PLM4100B35/330 E3 have?

The Lowara PLM4100B35/330 E3 delivers 3 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 21 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

130646230

130646240

130646255

130646320

130646322

130646360

130646370

130646410

130646420

130646430

130646448

130646610

Sources: [1]

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare