Louault RS3A19
Built: 2008-2008 · Series: Other models
More machines from model year 2008
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Louault – other models: the collective page for trailers outside the named ranges, from light tandem-axle trailers to a heavy low-loader, 3.4 to 13.6 t unladen weight, 3.5 to 34 t gross vehicle weight
This page brings together the Louault trailers that the register could not assign to a named range. Type codes such as R 1S, SERM, SR11A11, SR1CS190, SR2LA/33/E and SR3CA do not follow a system that can be read from the register, but they clearly cover a wide weight range, from trailers just over the 3.5-tonne mark to heavy low-loaders for construction machinery.
Read on 3 more paragraphs
The register lists 9 versions here with unladen weights from 3,400 to 13,590 kg, gross vehicle weights from 3,500 to 34,000 kg, lengths from 7,550 to 13,650 mm and widths from 2,480 to 2,550 mm.
The spread from light trailers to a 34-tonne low-loader points to a mix aimed at earthmoving and agricultural machinery transport: smaller versions for wheel loaders and mini excavators, larger ones for tracked excavators and dozers. Such trailers are typically run by construction and earthworks firms and plant hire companies that need to move equipment of varying weight depending on the job.
When buying used, the lighter models call for the usual checks on axles, brakes and frame; the heavy low-loaders additionally need the loading ramps checked, any hydraulic lowering system tested, the drawbar eye or kingpin inspected, axle load distribution checked, and current inspection dates confirmed, since the high payload accelerates wear on brakes and tyres.
Sources: Kennwerte der Modelle Louault
Technical data
Dimensions and weights
| Length | 7,750 mmcorrect |
|---|---|
| Width | 2,540 mmcorrect |
| Wheelbase | 4,350 mmcorrect |
| Unladen weight | 3,775 kgcorrect |
| Gross vehicle weight | 20,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Louault RS3A19 weigh?
The unladen weight is 3,775 kg.
What is the gross vehicle weight of the Louault RS3A19?
20,000 kg.
Up to what speed is the Louault RS3A19 approved?
Approved up to 100 km/h.
What are the dimensions of the Louault RS3A19?
7,750 mm × 2,540 mm.
When was the Louault RS3A19 built?
Production years: 2008.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.