Start › Excavators & compaction › Liugong › CLG906C

Liugong CLG906C

Series: LiuGong Midi Excavator

Source: http://usedequipment.liugong-europe.com/ mascus.com

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Liugong CLG906C belongs to the LiuGong Midi Excavator series. The engine delivers 50.9 hp (37.4 kW), has 4 cylinders, with a displacement of 3,000.5 cm³. Rated speed is 2,100 rpm. The unladen weight is 5,900 kg. Ground clearance is 350.5 mm. The pump delivers 150.3 l/min. Working pressure is 220 bar. The engine fitted is the 4TNV94L-PLY. The LiuGong Midi Excavator series covers 3 models. Rated output within it ranges from 37.4 to 60 kW; the CLG906C sits at the bottom of that range with 37.4 kW. Its immediate neighbours are the 906 above it with 45 kW. 33 Liugong models across 9 series are on record. The model is listed under Excavators & compaction. 10 verified figures from 1 source are on file.

Technical data

Engine

Engine model	4TNV94L-PLYcorrect
Power	50.9 hp (37.4 kW)correct
Rated speed	2,100 rpmcorrect
Cylinders	4correct
Displacement	3,000.5 cm³correct

Dimensions and weights

Ground clearance	350.5correct
Unladen weight	5,900 kgcorrect

Working data

Pump flow	150.3 l/mincorrect
Hydraulic pressure	220 barcorrect

Where this model stands

Power-to-weight ratio: 6.3 kW/t (37 kW / 5.9 t)

Stronger than 7% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Liugong CLG906C have?

The Liugong CLG906C delivers 50.9 hp.

How much does the Liugong CLG906C weigh?

The unladen weight is 5,900 kg.

What engine does the Liugong CLG906C have?

4 cylinders, 3,000 cm³ displacement.

What to check before buying

Check the hour meter against the service records — a replaced instrument is the most common gap.
Compare the data plate and chassis number with the papers.
Check the weights in the papers against the figures here — attachments change them.
Load the hydraulics and watch for sag.
Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →

Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →