Start › Mobile & rough terrain cranes › Link-Belt › HSP-8028S

Link-Belt HSP-8028S

Series: Link-Belt Rough Terrain Crane

The photo shows the RTC8050 Series II from the same series. Source: https://www.lectura-specs.com/en/model/cranes/rough-terrain-

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Link-Belt HSP-8028S is a model in the Link-Belt Rough Terrain Crane series. The engine delivers 131.8 hp (96.9 kW), has 8 cylinders, with a displacement of 8,193.5 cm³. Torque is 447.4 Nm. Rated speed is 2,800 rpm. The unladen weight is 20,860 kg. The wheelbase measures 3,080 mm. The tank holds 283.9 litres. The gearbox has 8 forward gears. There are also 2 reverse gears. The hydraulic tank holds 378.5 litres. The electrical system runs on 12 V. The engine fitted is the GM 8,2N. Tyre size: 20,5 x 25. The Link-Belt Rough Terrain Crane series covers 32 models. Rated output within it ranges from 111.5 to 349.8 hp; the HSP-8028S sits at the bottom of that range with 131.8 hp. Its immediate neighbours are the RTC8022 below it with 111.5 hp and the HSP-15 above it with 137.9 hp. 157 Link-Belt models across 10 series are on record. The model is listed under Cranes & access platforms. 16 verified figures from 1 source are on file.

Technical data

Engine

Engine modelGM 8.2Ncorrect
Power131.8 hp (96.9 kW)correct
Rated speed2,800 rpmcorrect
Torque447.4correct
Cylinders8correct
Displacement8,193.5 cm³correct

Dimensions and weights

Wheelbase3,080correct
Unladen weight20,860 kgcorrect

Drivetrain and chassis

Gearbox typeautomatic gearboxcorrect
Forward gears8correct
Reverse gears2correct
Tyre size20.5 x 25correct
System voltage12 Vcorrect

Working data

Hydraulic oil capacity378.5 lcorrect
Fuel tank capacity283.9 lcorrect

Where this model stands

Power-to-weight ratio: 4.6 kW/t (97 kW / 20.9 t)

Stronger than 8% of the mobile & rough terrain cranes in the register — out of 591 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Link-Belt HSP-8028S have?

The Link-Belt HSP-8028S delivers 132 hp.

How much does the Link-Belt HSP-8028S weigh?

The unladen weight is 20,860 kg.

What engine does the Link-Belt HSP-8028S have?

8 cylinders, 8,194 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 16 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

110 RT

75 RT

HSP-15

HSP-18

HSP-22

HSP-8010

HSP-8018

HSP-8022

HSP-8030

HSP-8040

HSP-8050

HSP-8060

Sources: [1]

Mobile crane in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare