Technical register for agricultural, construction and commercial machinery · sourced data
StartExcavators & compactionLink-Belt › 5800 Quantum

Link-Belt 5800 Quantum

Series: Link-Belt Hydraulic Excavator

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 5800 Quantum from Link-Belt is part of the Link-Belt Hydraulic Excavator series. The engine delivers 223.7 kW, has 6 cylinders, with a displacement of 10,831.8 cm³. Torque is 1,233.8 Nm. Rated speed is 2,000 rpm. The unladen weight is 45,268.5 kg. Ground clearance is 521.2 mm. The tank holds 650.3 litres. Maximum torque is reached at 1,300 rpm. The pump delivers 681.4 l/min. The hydraulic tank holds 450.1 litres. Working pressure is 318.5 bar. The cooling system holds 27.3 litres. The oil fill is 34.1 litres. The electrical system runs on 24 V. The engine fitted is the MIIC320-1,5c. The Link-Belt Hydraulic Excavator series covers 40 models. Rated output within it ranges from 63.4 to 331.1 kW; the 5800 Quantum sits in the middle of that range with 223.7 kW. Its immediate neighbours are the 350X2 below it with 202.1 kW and the 460LX above it with 235.6 kW. 157 Link-Belt models across 10 series are on record. The model is listed under Excavators & compaction. 18 verified figures from 1 source are on file.

Link-Belt Hydraulic Excavator: what LX, X2, X3 and X4 actually mean

The "Link-Belt Hydraulic Excavator" bucket on SpecCodex groups 40 live-listed models from one US crawler-excavator family, spanning compact to large machines. Reading a code like 130LX or 210X2 means separating two layers: the number before the suffix (130, 160, 210, 240…) names the size class, while the letters/digits after it name the production series.

Read on 4 more paragraphs

LX was the earlier series until LBX Company introduced the X2 generation in 2007: a re-engineered Tier III diesel with common-rail injection, a turbocharger with intercooler, more power at lower rpm, and a load-sensing hydraulic system delivering extra power boost under heavy work. X3 and X4 followed later within the same size scheme, which is why the bucket lists LX and X2 variants of the same base number side by side (e.g. 130LX next to 130X2).

The recorded range shows how wide the line-up is: engine output 63 to 331 kW, operating weight 12,292 to 80,013 kg, displacement 3,000 to 15,698 cm³ across 4- to 6-cylinder engines.

For a used machine, the generation on the nameplate matters more than the bare number: X2-era models feature cast boom- and arm-tip components and an Extended Maintenance System on pins and bushings for longer lube intervals — the service book shows whether that schedule was kept. On older LX machines, also check track tension, rollers, and the condition of hydraulic cylinders and the main pump.

In short: number = size class, suffix = generation. Since the bucket mixes both generations under one entry, only the nameplate or serial number gives a reliable answer.

Sources: Kennwerte der Modelle Link-Belt Hydraulic Excavator, — LBX Company: Firmengeschichte / Modellgenerationen, — Link-Belt Excavators: Prior Models Übersicht, — Equipment World: Link-Belt 130 X2 Series Ankündigung

Technical data

Engine

Engine modelMIIC320-1.5ccorrect
Power223.7 kWcorrect
Rated speed2,000 rpmcorrect
Torque1,233.8correct
Speed at max. torque1,300 rpmcorrect
Cylinders6correct
Displacement10,831.8 cm³correct
Aspirationturbochargedcorrect
Coolant capacity27.3 lcorrect
Engine oil capacity34.1 lcorrect

Dimensions and weights

Ground clearance521.2correct
Unladen weight45,268.5 kgcorrect

Working data

Pump flow681.4 l/mincorrect
Hydraulic oil capacity450.1 lcorrect
Hydraulic pressure318.5 barcorrect
Fuel tank capacity650.3 lcorrect

Other data

Cab height3,310.1correct
System voltage24 Vcorrect

Where this model stands

Power-to-weight ratio: 4.9 kW/t (224 kW / 45.3 t)

Stronger than 84% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Link-Belt 5800 Quantum have?

The Link-Belt 5800 Quantum delivers 224 kW.

How much does the Link-Belt 5800 Quantum weigh?

The unladen weight is 45,268 kg.

What engine does the Link-Belt 5800 Quantum have?

6 cylinders, 10,832 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 18 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare