Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Zil › ZIL-5301

Zil ZIL-5301

Built: 1995-2015 · Series: Light/Medium-duty truck

More machines from model year 1995

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The ZIL-5301 from Zil is part of the Light/Medium-duty truck series. Production: 1995-2015. The engine delivers 2 kW, with a displacement of 4,690 cm³. The machine is 3,404 mm long, 1,676 mm wide and 1,860 mm high. The wheelbase measures 2,540 mm. Transmission: 2-apeed planetary gear. Rated output across the Zil range ranges from 2 to 625 kW; the ZIL-5301 sits at the bottom of that range with 2 kW. Its immediate neighbours are the ZIL-130 above it with 14.7 kW. 186 Zil models across 11 series are on record.

Zil ZIL-5301 (1995–2015): light delivery truck with a 4,690 cm³ engine and an unusual two-speed planetary gearbox, 2,540 mm wheelbase and 1,676 mm width for urban duty

The ZIL-5301 was built at the Likhachov Moscow Automobile Plant, one of the most established Soviet and later Russian commercial vehicle makers. The series ran from 1995 to 2015 as a light truck for delivery duty.

Read on 3 more paragraphs

The engine displaces 4,690 cm³ and was paired with a two-speed planetary gearbox, a design rarely seen in light commercial vehicles. At a height of 1,860 mm, a wheelbase of 2,540 mm and a width of 1,676 mm, this is a compact vehicle built for urban traffic.

Vehicles of this size were built for urban delivery duty, where manoeuvrability and a small turning radius matter more than high payload or long range. The two-speed planetary gearbox is a simple, robust near-automatic design that keeps gear-changing to a minimum in everyday use.

When buying this compact chassis, the main point is the condition of the two-speed planetary gearbox, whose bands and clutches wear at high mileage, along with rust in the cab and frame. Parts for Russian commercial vehicles of this production period are available through specialist suppliers, but availability is worth confirming before purchase. Given the short wheelbase and narrow width, it is also worth checking wear in the steering joints and the condition of the exhaust system, both of which wear faster under stop-and-go urban duty and repeated short trips.

Sources: Kennwerte des Modells Zil ZIL-5301

Technical data

Engine

Engine2.9 L 177 C.I.D. 20 hpcorrect
Power2 kWcorrect
Displacement4,690 cm³correct

Dimensions and weights

Length3,404 mmcorrect
Width1,676 mmcorrect
Height1,860 mmcorrect
Wheelbase2,540 mmcorrect

Drivetrain and chassis

Gearbox2-apeed planetary gearcorrect

Frequently asked questions

How much power does the Zil ZIL-5301 have?

The Zil ZIL-5301 delivers 2 kW.

What engine does the Zil ZIL-5301 have?

4,690 cm³ displacement.

What are the dimensions of the Zil ZIL-5301?

3,404 mm × 1,676 mm × 1,860 mm.

When was the Zil ZIL-5301 built?

Production years: 1995-2015.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: [1]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare