Technical register for agricultural, construction and commercial machinery · sourced data

Liebherr LTM1070-4.1

Series: Liebherr Hydraulic Truck Crane

Source: mascus.co.uk

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Liebherr LTM1070-4.1 is a model in the Liebherr Hydraulic Truck Crane series. The engine delivers 372.1 hp (273.7 kW), has 6 cylinders, with a displacement of 9,960 cm³. Torque is 1,700.1 Nm. The machine is 12,600 mm long and 2,680 mm wide. The unladen weight is 47,900 kg. The wheelbase measures 5,350 mm. The gross vehicle weight is 48,000 kg. The gearbox has 12 forward gears. There are also 2 reverse gears. The machine runs on 8 wheels. The electrical system runs on 24 V. Tyre size: 14 R25. The Liebherr Hydraulic Truck Crane series covers 3 models. 518 Liebherr models across 45 series are on record.

Liebherr LTM1030-2.1 to LTM1070-4.1 – mobile cranes from Ehingen: 207 to 274 kW, 36,000 to 48,000 kg gross vehicle weight

Liebherr builds its mobile cranes at the Ehingen plant on the Danube; the LTM designation stands for Liebherr-Telekran Mobil. The number after LTM roughly indicates the load-capacity class in tonnes, the digit after the hyphen the chassis's axle count, and the following number the version generation – the LTM1030-2.1 carries a two-axle chassis, the LTM1070-4.1 a four-axle one.

Read on 3 more paragraphs

The register lists here 4 versions with 207 to 274 kW rated output from six-cylinders with 9,960 to 10,521 cm³ displacement, unladen weights of 35,750 to 47,900 kg, gross vehicle weights of 36,000 to 48,000 kg, vehicle lengths of 11,370 to 12,600 mm, vehicle widths of 2,550 to 2,680 mm and maximum torques of 1,491 to 2,305 Nm.

Cranes in this 30-to-70-tonne load class cover a large part of building construction, industrial assembly and smaller wind-turbine work, and their compact build lets them travel well on public roads without a special permit; competitors are chiefly Grove, Tadano and Terex.

On a used purchase, the condition of the telescopic boom sections and their slide pads, the tightness of the outrigger cylinders, the condition of the wire rope and hook block, the calibration of the load-moment limiter, and the steering and tyres of the multi-axle chassis count; spare parts run through the Liebherr dealer network.

Sources: SpecCodex register, model data: Liebherr Hydraulic Truck Crane, Liebherr (manufacturer)

Technical data

Engine

Power372.1 hp (273.7 kW)correct
Torque1,700.1 Nmcorrect
Cylinders6correct
Displacement9,960 cm³correct

Dimensions and weights

Length12,600 mmcorrect
Width2,680 mmcorrect
Wheelbase5,350 mmcorrect
Unladen weight47,900 kgcorrect
Gross vehicle weight48,000 kgcorrect

Drivetrain and chassis

Gearbox typeZF 12-speed gear box with automatic gearbox control system AS-TRONICcorrect
Forward gears12correct
Reverse gears2correct
Wheels8correct
Tyre size14 R25correct

Other data

System voltage24 Vcorrect

Where this model stands

Power-to-weight ratio: 5.7 kW/t (274 kW / 47.9 t)

Stronger than 63% of the mobile & rough terrain cranes in the register — out of 723 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Liebherr LTM1070-4.1 have?

The Liebherr LTM1070-4.1 delivers 372 hp.

How much does the Liebherr LTM1070-4.1 weigh?

The unladen weight is 47,900 kg.

What is the gross vehicle weight of the Liebherr LTM1070-4.1?

48,000 kg.

What engine does the Liebherr LTM1070-4.1 have?

6 cylinders, 9,960 cm³ displacement.

What are the dimensions of the Liebherr LTM1070-4.1?

12,600 mm × 2,680 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 19 individual figures for this model. They come from 3 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Used equipment offers
1 current listings for Liebherr LTM1070-4.1 on Hutnia.com.
View offers on Hutnia.com →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: RDW — Dutch national vehicle register (retrieved August 2026) · RitchieSpecs equipment specifications (retrieved August 2026) · How we check the data

Mobile crane in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare