LA YE3-160M2-2
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
LA – other models: the collective page of MEPS-registered YE3 three-phase motors outside the named ranges, manufactured in China, two-pole, 7.5 to 37 kW, consistently IP55 protection and B35 mounting
This page gathers the three-phase motors recorded in the Australian energy-efficiency register under the code LA, which the register could not assign to a named range. Model designations such as YE3-160M1-2 or YE3-200L2-2 belong to the Chinese YE3 range, a development of the older Y and YE2 ranges marking the IE3 efficiency class; the digits after the hyphen give the frame size (132 to 200) and pole count (2).
Read on 3 more paragraphs
The register lists here 6 versions with 7.5 to 37 kW, exclusively two-pole, at a supply voltage of 415 V. Full-load efficiencies range from 90.42 to 93.77%, and at 75% load from 90.18 to 93.63%. Protection is consistently IP55, the mounting form consistently B35, and frame sizes run from 132S2 to 200L2. China is recorded as the manufacturing country; testing followed the 2019 GEMS determination for three-phase motors with test method 2-1-1B, and two of the six motors reach the 2018 High Efficiency Level (roughly IE3).
The two-pole YE3 range covers the high-speed segment of compact three-phase motors for pumps, compressors and fans, as offered by numerous Chinese makers for export to countries with MEPS regulations such as Australia.
When buying used, bearing condition and a checked insulation resistance of the winding, the visible condition of the terminal box and fan cover, the condition of shaft and key, and a legible nameplate with frame size and pole count matter; on the two-pole, high-speed motors, bearing play and running smoothness are also worth checking. Spares run through the relevant importer.
Sources: Kennwerte der Modelle LA (weitere Modelle, MEPS-Registrierungen)
Technical data
Engine
| Rated output | 15 kWcorrect |
|---|
Electrical data
| Rated voltage | 415 Vcorrect |
|---|---|
| Number of poles | 2correct |
| Protection class | IP55correct |
| Frame size | 160M2correct |
| Mounting (IEC 60034-7) | B35correct |
| Efficiency at full load | 91 %correct |
| Efficiency at 75 % load | 90.91 %correct |
| Efficiency at half load | 89.26 %correct |
Origin and approval
| Country of manufacture | Chinacorrect |
|---|
Other data
| Standard applied | Greenhouse and Energy Minimum Standards (Three Phase Electric Motors) Determination 2019correct |
|---|---|
| Test method | IEC 60034-2-1 (Edition 2.0)correct |
Frequently asked questions
How much power does the LA YE3-160M2-2 have?
The LA YE3-160M2-2 delivers 15 kW.
What to check before buying
- Match the data plate against the order: frame size, mounting and rating have to agree.
- Check the ingress rating against the installation site — outdoors or in dust the demands differ.
- Hold the mounting form and dimensions against the existing seat before ordering.
- The pole count sets the speed — when replacing an older unit, compare this first.
- For used units, ask about winding condition and bearing play.
- Ask about parts availability for this series — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 21 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Electric motor in 3D section
Turn the model, look inside and click an assembly — each one is explained.