Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trailers › Kuiper › KD 3504

Kuiper KD 3504

Built: 2007-2012 · Series: KD

More machines from model year 2007

The photo shows the KD 20002 from the same series. Source: https://www.truck1.eu/trailers/tipper-trailers/unimog-anhang

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The KD 3504 comes from Kuiper. Production: 2007-2012. The machine is 2,270 mm wide. The unladen weight is 2,115 kg. The wheelbase measures 582 mm. Top speed is 100 km/h. The gross vehicle weight is 3,500 kg. Unladen weight across the Kuiper range ranges from 660 to 25,040 kg; the KD 3504 sits at the bottom of that range with 2,115 kg. Its immediate neighbours are the FLEXLINE below it with 2,090 kg and the KTD above it with 2,156 kg. 189 Kuiper models are on record. The model is listed under Trailers. 7 verified figures from 1 source are on file.

Kuiper KD – Dutch bespoke trailer and semi-trailer range built in Staphorst: 12 versions from 3.5 to 20 tonnes gross vehicle weight

Kuiper Wagenbouw is a Dutch vehicle builder from Staphorst (province of Overijssel) specialising in the design and construction of trailers and semi-trailers in one-off and small-series production, and which also converts van chassis such as the VW Crafter, Mercedes Sprinter or Mitsubishi Fuso into BE-category combinations. The KD range numbers its models with a four-digit type figure from KD 1102 to KD 9005, with the suffix VK marking a particular version of the base model.

Read on 3 more paragraphs

The register lists 12 versions of the Kuiper KD with kerb weights from 1,650 to 7,740 kg and gross vehicle weights from 3,500 to 20,000 kg. Lengths range from 9,600 to 11,980 mm, widths from 1,750 to 2,550 mm.

With this span from the light 3.5-tonne class to the 20-tonne trailer, the KD serves both smaller trade and agricultural businesses and haulage firms that rely on individually built trailer solutions made in the Netherlands. The close combination of vehicle conversion and trailer building at the same site allows Kuiper to offer the towing vehicle and trailer as a matched overall solution.

When buying used, the frame and drawbar deserve particular attention for corrosion and accident damage, along with the axles, brakes and lighting, and, depending on the version, the condition of the load floor; since these are one-off and small-series vehicles, it is also worth asking Kuiper in Staphorst directly about spare parts.

Sources: Kennwerte der Modelle Kuiper KD, Kuiper Wagenbouw (Hersteller)

Technical data

Dimensions and weights

Width2,270 mmcorrect
Wheelbase582 mmcorrect
Unladen weight2,115 kgcorrect
Gross vehicle weight3,500 kgcorrect

Drivetrain and chassis

Top speed100 km/hcorrect

Frequently asked questions

How much does the Kuiper KD 3504 weigh?

The unladen weight is 2,115 kg.

What is the gross vehicle weight of the Kuiper KD 3504?

3,500 kg.

Up to what speed is the Kuiper KD 3504 approved?

Approved up to 100 km/h.

When was the Kuiper KD 3504 built?

Production years: 2007-2012.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare