Start › Excavators & compaction › Kubota › KX161-3

Kubota KX161-3

Series: Kubota Midi Excavator

Wikimedia Commons · CC BY-SA 3.0 · BlueBreezeWiki · Dateiseite

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the KX161-3, Kubota offers a model from the Kubota Midi Excavator series. The engine delivers 35 kW, with a displacement of 2,433.5 cm³. Rated speed is 2,200 rpm. The unladen weight is 5,230.8 kg. Ground clearance is 320 mm. The tank holds 70 litres. The pump delivers 118.9 l/min. The hydraulic tank holds 67 litres. The engine fitted is the V2403-M. The Kubota Midi Excavator series covers 3 models. Rated output within it ranges from 31.3 to 47.9 kW; the KX161-3 sits in the lower part of that range with 35 kW. Its immediate neighbours are the U45 below it with 31.3 kW and the KX080-3 above it with 47.9 kW. 1026 Kubota models across 33 series are on record. The model is listed under Excavators & compaction. 9 verified figures from 1 source are on file.

Technical data

Engine

Engine model	V2403-Mcorrect
Power	35 kWcorrect
Rated speed	2,200 rpmcorrect
Displacement	2,433.5 cm³correct

Dimensions and weights

Ground clearance	320correct
Unladen weight	5,230.8 kgcorrect

Working data

Pump flow	118.9 l/mincorrect
Hydraulic oil capacity	67 lcorrect
Fuel tank capacity	70 lcorrect

Where this model stands

Power-to-weight ratio: 6.7 kW/t (35 kW / 5.2 t)

Stronger than 6% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Kubota KX161-3 have?

The Kubota KX161-3 delivers 35 kW.

How much does the Kubota KX161-3 weigh?

The unladen weight is 5,231 kg.

What engine does the Kubota KX161-3 have?

2,434 cm³ displacement.

What to check before buying

Check the hour meter against the service records — a replaced instrument is the most common gap.
Compare the data plate and chassis number with the papers.
Check the weights in the papers against the figures here — attachments change them.
Load the hydraulics and watch for sag.
Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →

Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →