Krone SZ-P
Built: 2012-2012 · Series: SZP
More machines from model year 2012
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Krone SZP – semi-trailer range with curtainsider body (CS), SZP 18 and SZP 20 variants, 3,260 to 7,740 kg unladen weight, 30,000 to 35,000 kg gross weight
The SZP range from the Bernard Krone works in Spelle, Emsland, comprises semi-trailers offered in the main versions SZP 18 and SZP 20, as well as a plain SZ-P/EZ without a number suffix. The abbreviation CS in the type designations stands for the curtainsider body with a sliding side curtain, while ELNZ and ZLNZ mark further body and axle variants within the range.
Read on 3 more paragraphs
The register lists here 11 versions with unladen weights from 3,260 to 7,740 kg, gross weights from 30,000 to 35,000 kg, lengths from 7,300 to 13,890 mm and widths from 2,440 to 2,550 mm.
With gross weights from 30 to 35 tonnes the SZP semi-trailers are built for European long-haul transport, where Krone ranks alongside Schmitz Cargobull and Kögel among the leading semi-trailer makers; the curtainsider design allows side loading by forklift or crane while still protecting the load from the weather. As a semi-trailer the SZP is coupled to a tractor unit and driven in professional haulage with a CE driving licence.
When buying a used curtainsider semi-trailer, what counts is the condition of the curtain and its tensioning mechanism, corrosion on the frame and side posts, the function of the brakes and air suspension, and the condition of the axles, kingpin and tyres; parts for the curtain, braking system and running gear are supplied through the Krone dealer network. The landing legs, the connections for brake lines and the electrical socket, and the ABS and EBS electronics also belong in the pre-purchase check.
Sources: Kennwerte der Modelle Krone SZP, Krone (Fahrzeugwerk Bernard Krone)
Technical data
Dimensions and weights
| Length | 11,250 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 7,400 mmcorrect |
| Unladen weight | 6,600 kgcorrect |
| Gross vehicle weight | 32,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Krone SZ-P weigh?
The unladen weight is 6,600 kg.
What is the gross vehicle weight of the Krone SZ-P?
32,000 kg.
Up to what speed is the Krone SZ-P approved?
Approved up to 100 km/h.
What are the dimensions of the Krone SZ-P?
11,250 mm × 2,550 mm.
When was the Krone SZ-P built?
Production years: 2012.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
SZP
SZP 18
SZP 18 ELNZ-CS
SZP 18 ELNZ4-CS
SZP 18 EZ
SZP 20
SZP 20 Z1NZ-CS
SZP 20 ZLNZ4
SZP 20 ZLNZ4-CS
SZP 20ZLNZ3-CS
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.