Start › Trailers › Krone › DOLLY

Krone DOLLY

Built: 2016-2016 · Series: Trailers over 10 t (Class O4)

The photo shows the SD27C2EP from the same series. Source: https://www.technikboerse.com/gebraucht/anhaenger-788

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Krone DOLLY is a machine built by Krone. Production: 2016. The machine is 2,480 mm wide. The unladen weight is 2,630 kg. Top speed is 100 km/h. The gross vehicle weight is 18,000 kg. The machine runs on 4 wheels. Unladen weight across the Krone range ranges from 1,300 to 24,000 kg; the DOLLY sits at the bottom of that range with 2,630 kg. Its immediate neighbours are the ZZW 18 EL below it with 2,580 kg and the Szc 20 above it with 2,700 kg. 364 Krone models across 2 series are on record. The model is listed under Trailers. 7 verified figures from 1 source are on file.

Technical data

Dimensions and weights

Width2,480 mmcorrect
Unladen weight2,630 kgcorrect
Gross vehicle weight18,000 kgcorrect

Drivetrain and chassis

Wheels4correct
Top speed100 km/hcorrect

Frequently asked questions

How much does the Krone DOLLY weigh?

The unladen weight is 2,630 kg.

What is the gross vehicle weight of the Krone DOLLY?

18,000 kg.

Up to what speed is the Krone DOLLY approved?

Approved up to 100 km/h.

When was the Krone DOLLY built?

Production years: 2016.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

-, STANDARD

-,SDP-02

-,UOPLYST

---

-KRONE

0747

1810 KRONE

3 ASSIGE OPLEGGER

3 E 20

3E20

A2W18-E

AD

Sources: [1]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare