Start › Wheel loaders › Komatsu › WA800-3 Tier 2

Komatsu WA800-3 Tier 2

Series: Komatsu Wheel Loader

Source: https://www.komatsu.eu/de/alte-modelle/radlader/wa800-3

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The WA800-3 Tier 2 from Komatsu is part of the Komatsu Wheel Loader series. The engine delivers 864.8 hp (602.5 kW), has 12 cylinders, with a displacement of 30,479.9 cm³. Rated speed is 2,000 rpm. The unladen weight is 101,899.5 kg. The wheelbase measures 5,452.9 mm. Ground clearance is 551.7 mm. The tank holds 1,555 litres. The gearbox has 3 forward gears. There are also 3 reverse gears. The pump delivers 405 l/min. The hydraulic tank holds 724.9 litres. The cooling system holds 336.9 litres. The electrical system runs on 24 V. The engine fitted is the SAA12V140E-3. Tyre size: 45/65-45-45. The Komatsu Wheel Loader series covers 104 models. Rated output within it ranges from 29.4 to 1,738.8 hp; the WA800-3 Tier 2 sits in the middle of that range with 864.8 hp. Its immediate neighbours are the WA700-3 With AJSS below it with 693.5 hp and the WA900-3 above it with 909.4 hp. 1159 Komatsu models across 39 series are on record. The model is listed under Wheel loaders. 20 verified figures from 1 source are on file.

Technical data

Engine

Engine modelSAA12V140E-3correct
Power864.8 hp (602.5 kW)correct
Rated speed2,000 rpmcorrect
Cylinders12correct
Displacement30,479.9 cm³correct
AspirationTurbocharged and Aftercooledcorrect
Coolant capacity336.9 lcorrect

Dimensions and weights

Wheelbase5,452.9correct
Ground clearance551.7correct
Unladen weight101,899.5 kgcorrect

Drivetrain and chassis

Gearbox typeFull-powershift transmissioncorrect
Forward gears3correct
Reverse gears3correct
Tyre size45/65-45-45correct
System voltage24 Vcorrect

Working data

Pump flow405 l/mincorrect
Hydraulic oil capacity724.9 lcorrect
Fuel tank capacity1,555 lcorrect

Other data

Height5,276.1correct

Where this model stands

Power-to-weight ratio: 5.9 kW/t (602 kW / 101.9 t)

Stronger than 99% of the wheel loaders in the register — out of 1,253 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Komatsu WA800-3 Tier 2 have?

The Komatsu WA800-3 Tier 2 delivers 865 hp.

How much does the Komatsu WA800-3 Tier 2 weigh?

The unladen weight is 101,900 kg.

What engine does the Komatsu WA800-3 Tier 2 have?

12 cylinders, 30,480 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 20 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

W120-3

W170-2

W180-1

W20-1

W260-1

W30

W40

W60

W70-3

W90-3

WA 400-5

WA100M-5

Sources: [1]

Wheel loader in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare