Technical register for agricultural, construction and commercial machinery · sourced data
Start › Excavators & compaction › Komatsu › PC650LC-8

Komatsu PC650LC-8

Series: Komatsu Hydraulic Excavator

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Komatsu PC650LC-8 belongs to the Komatsu Hydraulic Excavator series. The engine delivers 319.9 kW, has 6 cylinders. Rated speed is 1,800 rpm. The unladen weight is 66,401.4 kg. Ground clearance is 789.4 mm. The tank holds 880.1 litres. The hydraulic tank holds 359.6 litres. The cooling system holds 57.9 litres. The oil fill is 40.1 litres. The engine fitted is the SAA6D140E-5. The Komatsu Hydraulic Excavator series covers 184 models. Rated output within it ranges from 53 to 1,180.1 kW; the PC650LC-8 sits in the lower part of that range with 319.9 kW. Its immediate neighbours are the PC600SE-6 below it with 287.1 kW and the PC750-6 above it with 331 kW. Unladen weight within it ranges from 10,300 to 335,000.1 kg; here the PC650LC-8 sits in the lower part of that range with 66,401.4 kg. 1218 Komatsu models across 47 series are on record.

Komatsu PC — what the number and dash figure actually tell you

Anyone typing “Komatsu PC120” or “PC100” is usually trying to decode the label: PC is Komatsu's crawler-excavator designation, the following number places the model roughly in a size class, and a dash number at the end marks the generation.

Read on 4 more paragraphs

Recent generations run under labels such as -8, -10 or -11; each update brings a revised engine, hydraulics and cab plus tighter emissions rules, while the base number stays the same. The added letter LC marks a widened, lengthened undercarriage that spreads more contact area on soft soil.

Alongside the PC line, Komatsu also sells models such as H135S, H455S or H655S, a separate family for very large open-pit excavators tracing back to the earlier partnership with German manufacturer Demag. Its letter-and-number logic follows its own rules and does not map onto the PC models.

The “Komatsu Hydraulic Excavator” collective entry holds both families side by side, from compact excavators starting around 53 kW up to the large H-series machines. When buying used, check the hour meter along with track rollers, chain tension and cylinder seals.

In short: the number after PC signals the size class, the dash number the generation, and models like PC100, PC120 or H655S show how wide a range sits under one register entry.

Sources: Kennwerte der Modelle Komatsu Hydraulic Excavator, Bagger-Typenschluessel im Herstellervergleich, Komatsu Seriennummern- und Generationen-Leitfaden, Demag-Komatsu H655S, Museumsarchiv

Technical data

Engine

Engine modelSAA6D140E-5correct
Power319.9 kWcorrect
Rated speed1,800 rpmcorrect
Cylinders6correct
Coolant capacity57.9 lcorrect
Engine oil capacity40.1 lcorrect

Dimensions and weights

Ground clearance789.4correct
Unladen weight66,401.4 kgcorrect

Working data

Hydraulic oil capacity359.6 lcorrect
Fuel tank capacity880.1 lcorrect

Other data

Cab height3,291.8correct

More machines with this engine (SAA6D140E-5, 14)

Where this model stands

Power-to-weight ratio: 4.8 kW/t (320 kW / 66.4 t)

Stronger than 92% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Komatsu PC650LC-8 have?

The Komatsu PC650LC-8 delivers 320 kW.

How much does the Komatsu PC650LC-8 weigh?

The unladen weight is 66,401 kg.

What engine does the Komatsu PC650LC-8 have?

6 cylinders.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare