Technical register for agricultural, construction and commercial machinery · sourced data
StartExcavators & compactionKomatsu › PC220-6

Komatsu PC220-6

Series: Komatsu Hydraulic Excavator

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Komatsu PC220-6 belongs to the Komatsu Hydraulic Excavator series. The engine delivers 162.2 hp (117.8 kW), has 6 cylinders, with a displacement of 5,881.3 cm³. Rated speed is 2,100 rpm. The unladen weight is 22,180 kg. Ground clearance is 442 mm. The tank holds 340.3 litres. The pump delivers 432.3 l/min. The hydraulic tank holds 166.2 litres. Working pressure is 348.2 bar. The engine fitted is the SA6D102E. The Komatsu Hydraulic Excavator series covers 179 models. Rated output within it ranges from 72.1 to 3,782.5 hp; the PC220-6 sits at the bottom of that range with 162.2 hp. Its immediate neighbours are the PC240-6 below it with 160.5 hp and the PC210LC-10 above it with 167.3 hp. 1159 Komatsu models across 39 series are on record. The model is listed under Excavators & compaction. 13 verified figures from 1 source are on file.

Komatsu PC — what the number and dash figure actually tell you

Anyone typing “Komatsu PC120” or “PC100” is usually trying to decode the label: PC is Komatsu's crawler-excavator designation, the following number places the model roughly in a size class, and a dash number at the end marks the generation.

Read on 4 more paragraphs

Recent generations run under labels such as -8, -10 or -11; each update brings a revised engine, hydraulics and cab plus tighter emissions rules, while the base number stays the same. The added letter LC marks a widened, lengthened undercarriage that spreads more contact area on soft soil.

Alongside the PC line, Komatsu also sells models such as H135S, H455S or H655S, a separate family for very large open-pit excavators tracing back to the earlier partnership with German manufacturer Demag. Its letter-and-number logic follows its own rules and does not map onto the PC models.

The “Komatsu Hydraulic Excavator” collective entry holds both families side by side, from compact excavators starting around 53 kW up to the large H-series machines. When buying used, check the hour meter along with track rollers, chain tension and cylinder seals.

In short: the number after PC signals the size class, the dash number the generation, and models like PC100, PC120 or H655S show how wide a range sits under one register entry.

Sources: Kennwerte der Modelle Komatsu Hydraulic Excavator, Bagger-Typenschluessel im Herstellervergleich, Komatsu Seriennummern- und Generationen-Leitfaden, Demag-Komatsu H655S, Museumsarchiv

Technical data

Engine

Engine modelSA6D102Ecorrect
Power162.2 hp (117.8 kW)correct
Rated speed2,100 rpmcorrect
Cylinders6correct
Displacement5,881.3 cm³correct

Dimensions and weights

Ground clearance442correct
Unladen weight22,180 kgcorrect

Working data

Pump flow432.3 l/mincorrect
Hydraulic oil capacity166.2 lcorrect
Hydraulic pressure348.2 barcorrect
Fuel tank capacity340.3 lcorrect

Other data

Cab height2,907.8correct

More machines with this engine (SA6D102E, 9)

Where this model stands

Power-to-weight ratio: 5.3 kW/t (118 kW / 22.2 t)

Stronger than 54% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Komatsu PC220-6 have?

The Komatsu PC220-6 delivers 162 hp.

How much does the Komatsu PC220-6 weigh?

The unladen weight is 22,180 kg.

What engine does the Komatsu PC220-6 have?

6 cylinders, 5,881 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare