StartMining equipmentKomatsu › D85E-18

Komatsu D85E-18 Crawler

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The D85E-18 from Komatsu is part of the Komatsu Crawler Tractor series. The engine delivers 223.1 hp (164.1 kW), with a displacement of 14,010.9 cm³. Torque is 1,029.1 Nm. The unladen weight is 19,304.9 kg. Ground clearance is 405.4 mm. The tank holds 450.1 litres. The gearbox has 3 forward gears. There are also 3 reverse gears. The cooling system holds 79.1 litres. The engine fitted is the NT-855. The Komatsu Crawler Tractor series covers 265 models. Rated output within it ranges from 35.5 to 4,126.5 hp; the D85E-18 sits at the bottom of that range with 223.1 hp. Its immediate neighbours are the D65WX-17 below it with 209.9 hp and the D85E-21 above it with 228.1 hp. 1159 Komatsu models across 39 series are on record. The model is listed under Mining equipment. 14 verified figures from 1 source are on file.

Technical data

Engine

Engine modelNT-855correct
Power223.1 hp (164.1 kW)correct
Torque1,029.1correct
Displacement14,010.9 cm³correct
Aspirationturbochargedcorrect
Coolant capacity79.1 lcorrect

Dimensions and weights

Ground clearance405.4correct
Unladen weight19,304.9 kgcorrect

Drivetrain and chassis

Gearbox typeplanetary gearcorrect
Forward gears3correct
Reverse gears3correct

Working data

Fuel tank capacity450.1 lcorrect

Other data

Height3,395.5correct

Where this model stands

Power-to-weight ratio: 8.5 kW/t (164 kW / 19.3 t)

Stronger than 59% of the mining equipment in the register — out of 945 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Komatsu D85E-18 have?

The Komatsu D85E-18 delivers 223 hp.

How much does the Komatsu D85E-18 weigh?

The unladen weight is 19,305 kg.

What engine does the Komatsu D85E-18 have?

14,011 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Dump truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare