Kennis TRAILERS B.V.
Built: 2008-2008 · Series: Other models
More machines from model year 2008
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Kennis – other models: Dutch loader-crane trailers of the OP, TPD and TTD ranges, 600 to 29,390 kg kerb weight, up to 54 t gross vehicle weight
This page gathers Kennis trailers outside the named ranges. Kennis Trailers B.V., a Dutch manufacturer, fits its trailers with loader cranes; model codes such as OP-1230-GB, TPD.348 and TTD.454 combine a range abbreviation with a multi-digit number. The prefixes OP, TPD, TBD and TTD each denote a separate range, and the number after them rises with the size of the version.
Read on 3 more paragraphs
The register lists here 34 versions with kerb weights from 600 to 29,390 kg and gross vehicle weights from 1,150 to 54,000 kg, at widths from 1,410 to 2,600 mm; length is only recorded for part of the models and ranges from 9,600 to 14,040 mm.
With gross vehicle weights up to 54 tonnes, the heaviest Kennis trailers count among the crane-equipped semi-trailers for heavy haulage, while the lighter versions serve as loader-crane trailers in construction and municipal work. Loader-crane trailers of this kind are used in landscaping, by roofers and at municipal depots.
When buying used, check the crane jib, hydraulic cylinders and hoses, and the outriggers, the function of the remote control, the condition of the frame and axles for rust and cracks, and the brake system. On every crane jib also check the load-diagram plate, the function of the overload cut-out, and a valid crane inspection under the applicable regulations; spares for the crane and hydraulics are supplied through Kennis's own factory service.
Sources: Kennwerte der Modelle Kennis (weitere Modelle), RDW (Niederlande)
Technical data
Dimensions and weights
| Length | 12,310 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 8,750 mmcorrect |
| Unladen weight | 8,120 kgcorrect |
| Gross vehicle weight | 39,000 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Kennis TRAILERS B.V. weigh?
The unladen weight is 8,120 kg.
What is the gross vehicle weight of the Kennis TRAILERS B.V.?
39,000 kg.
Up to what speed is the Kennis TRAILERS B.V. approved?
Approved up to 100 km/h.
What are the dimensions of the Kennis TRAILERS B.V.?
12,310 mm × 2,550 mm.
When was the Kennis TRAILERS B.V. built?
Production years: 2008.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
-
C.345
C345
CL-1227-ST
CL-1720-1-FB
CL-1730-2-FB
GB01230MB
KENNIS
KENNIS C345
KENNIS TRAILERS B.V.
MINI
OP-1230-2-GB
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.