StartTractorsKat › 1504

Kat 1504

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Kat 1504 is a tractor made by Kat. The engine produces 110 kW.

Propulsion comes from MFWD.

It runs on diesel; the engine is water-cooled. Within the range, rated power spans from 93 to 330 kW; with 110 kW, the 1504 sits in the mid-field. Directly alongside are the 1404 with 100 kW below and the 2804 with 210 kW above.

Technical data

Engine

Fueldieselcorrect
Power150 hp (110 kW)correct
Coolingwater-cooledcorrect

Drivetrain and chassis

Driveselectable four-wheel drivecorrect

Origin and approval

PlantXuzhou, Jiangsu, Chinacorrect

Frequently asked questions

How much power does the Kat 1504 have?

The Kat 1504 delivers 150 hp.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare