Kapur Power KD178FA
Built: 2012-2012 · Series: Other models
More machines from model year 2012
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Kapur Power – other nonroad diesel engines: the EPA register of single-cylinder KD178FA and KD186FA by 78 and 86 mm bore, 2012 model year, Tier 4 below 8 kW
The US EPA classifies small diesel engines for mobile equipment by power category; Kapur Power's KD178FA and KD186FA versions fall into the lowest category below 8 kW and into the Tier 4 (Final or Phase-in) emission stage. This page gathers both versions that the register could not assign to a named range. The type numbers 178 and 186 match the cylinder bores of 78 and 86 mm listed in the register, a numbering scheme common across the Chinese small-diesel industry.
Read on 3 more paragraphs
The register lists here 2 versions from the 2012 model year, with 4 to 6 kW rated output at a constant 3,600 rpm, from single-cylinders with 78 to 86 mm bore and 62 to 72 mm stroke – short-stroke in design. Maximum torque ranges from 11.3 to 12.3 Nm, again at 3,600 rpm; both versions run direct injection and diesel with 300 to 500 ppm sulphur content.
Engines of this size come from a broad field of Chinese suppliers who build very similar single-cylinder diesel engines in parallel for export; end customers are mainly makers of generator sets, water pumps and small construction equipment.
When buying used, on these single-cylinders it is worth checking the injector for dripping after the engine stops, the fuel filter for contamination, and the ease of movement of the starter; the engines usually run at a fixed speed without manual speed control. Spare parts for this widely used format are available through the general trade for Chinese small diesel engines.
Sources: Kennwerte der Modelle Kapur Power (weitere Nonroad-Dieselmotoren)
Technical data
Engine
| Engine code | KD186FAcorrect |
|---|---|
| Engine family | CFZKL.418F86correct |
| Engine families | CFZKL.418F86correct |
| Fuel | 300-500 ppm Low Sulfur Dieselcorrect |
| Rated output | 4 kWcorrect |
| Power band | kW<8correct |
| Rated speed | 3,600 rpmcorrect |
| Maximum torque | 11.3 N·mcorrect |
| Speed at max. torque | 3,600 rpmcorrect |
| Cylinders | 1correct |
| Cylinder layout | in linecorrect |
| Bore | 78 mmcorrect |
| Stroke | 62 mmcorrect |
| Operating cycle | four-stroke dieselcorrect |
| Injection | direct injectioncorrect |
| Aspiration | naturally aspiratedcorrect |
| Emissions stage | Tier 4 (Final or Phase In)correct |
Origin and approval
| Version | KD186FAcorrect |
|---|---|
| Built from | 2012correct |
| Built to | 2012correct |
| Model year from | 2012correct |
| Model year to | 2012correct |
Frequently asked questions
How much power does the Kapur Power KD178FA have?
The Kapur Power KD178FA delivers 4 kW.
When was the Kapur Power KD178FA built?
Production years: 2012.
What to check before buying
- Match the data plate against the order: frame size, mounting and rating have to agree.
- For used units, ask about winding condition and bearing play.
- Ask about parts availability for this series — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 24 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Diesel engine in 3D section
Turn the model, look inside and click an assembly — each one is explained.