Kalmar DCE90-6L
Series: Kalmar Dieselstapler
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Kalmar DCE90-6L is a diesel forklift with 9,000 kg lifting capacity from Kalmar, a maker of port and terminal equipment. It is fitted with a duplex mast and tailored to handling in works and on storage yards.
The duplex mast lifts to 4,550 mm and the load centre is 609.6 mm. That allows loads of 9,000 kg to be put onto trucks and set down in racks or blocks on the second and third tier. The unladen weight of 11,300 kg gives the truck stability, and the width of 2,000 mm is sufficient for aisles in halls and for loading ramps. The pneumatic tyres, two wheels at the front and two at the rear, are insensitive to unevenness on storage yards and gravel surfaces.
In the Kalmar range the DCE90-6L stands above the lighter models and below the models with two-digit tonnages. It is chosen where weight and stacking height are both required, for example with precast concrete, steel sections, paper reels and timber packs in the handling of ports and industrial plants.
Technical data
Dimensions and weights
| Width | 2,000 mmcorrect |
|---|---|
| Unladen weight | 11,300 kgcorrect |
Drivetrain and chassis
| Tyre type | pneumatic tyrescorrect |
|---|
Working data
| Lifting capacity | 9,000 kgcorrect |
|---|---|
| Lift height | 4,550 mmcorrect |
| Mast type | duplexcorrect |
Other data
| Front wheels | 2correct |
|---|---|
| Load centre | 609.6 mmcorrect |
| Rear wheels | 2correct |
Frequently asked questions
How much does the Kalmar DCE90-6L weigh?
The unladen weight is 11,300 kg.
What is the load capacity of the Kalmar DCE90-6L?
Load capacity is 9,000 kg at a 610 mm load centre, lift height 4,550 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 4 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: forklift-international.com (retrieved August 2026) · RitchieSpecs equipment specifications (retrieved August 2026) · forkliftcenter.com (retrieved October 2026) · machineseeker-india.com (retrieved October 2026) · How we check the data
Forklift in 3D section
Turn the model, look inside and click an assembly — each one is explained.
