Technical register for agricultural, construction and commercial machinery · sourced data

Kalmar DCE80-6

Series: Kalmar Dieselstapler

Source: kalmar.cn

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The DCE80-6 is a diesel forklift from the Kalmar Diesel forklifts series. It has a width of 2,000 mm, a curb weight of 10,800 kg and is equipped with pneumatic tires. The machine features four wheels, two at the front and two at the rear, and a Duplex mast that can lift loads up to 8,000 kg to a height of 4,000 mm. The load centre is 609.6 mm, which contributes to stability when handling heavy loads.

A lifting capacity of 8,000 kg enables the forklift to raise heavy pallets and containers, while the 4,000 mm lift height provides sufficient clearance for stacking in higher racks. The curb weight of 10,800 kg affects ground pressure and transportability: a higher weight gives better traction but also increases energy consumption during travel. Pneumatic tires improve ride comfort and reduce vibrations on uneven surfaces. The Duplex mast allows compact operation in narrow aisles because it folds into two sections.

In the series the DCE80-6 ranks 15th out of 18 models for curb weight with a value of 10,800 kg. The next smaller model DCE 70‑6 has a curb weight of 9,700 kg, while the next larger model DCE90‑6L weighs 11,300 kg. Its weight is practically equal to the DCE 80‑6HE and falls within the series range of 8,400 to 50,000 kg.

Technical data

Dimensions and weights

Width2,000 mmcorrect
Unladen weight10,800 kgcorrect

Drivetrain and chassis

Tyre typepneumatic tyrescorrect

Working data

Lifting capacity8,000 kgcorrect
Lift height4,000 mmcorrect
Mast typeduplexcorrect

Other data

Front wheels2correct
Load centre609.6 mmcorrect
Rear wheels2correct

Frequently asked questions

How much does the Kalmar DCE80-6 weigh?

The unladen weight is 10,800 kg.

What is the load capacity of the Kalmar DCE80-6?

Load capacity is 8,000 kg at a 610 mm load centre, lift height 4,000 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: forklift-international.com (retrieved August 2026) · RitchieSpecs equipment specifications (retrieved August 2026) · How we check the data

Forklift in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare