Kalmar DCD320-12LB
Series: Kalmar Dieselstapler
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The DCD320-12LB is a diesel forklift from the Kalmar Diesel forklifts series. It is manufactured by Kalmar and belongs to the diesel forklift group. The machine has a width of 3,410 mm, a curb weight of 39,200 kg and is equipped with pneumatic tires. Its lifting capacity is 32,000 kg, the maximum lift height is 6,500 mm and the mast type is Duplex. The load centre is positioned at 1,200.1 mm, with two wheels at the front and two at the rear.
A lifting capacity of 32,000 kg enables the forklift to raise and move heavy loads, while the Duplex mast provides stable lifts up to 6,500 mm. The curb weight of 39,200 kg places the unit in the middle range of the series, offering a balance between load capacity and mobility. Pneumatic tires give good ground contact and reduce ground pressure, facilitating operation on various surfaces.
In the Kalmar diesel forklift series the DCD320-12LB ranks third in curb weight out of 18 models. The next lighter model is the DCD220-12LB with 31,200 kg, and the next heavier model is the DCD370-12 with 47,500 kg. The weight span of the series runs from 8,400 kg to 50,000 kg.
Technical data
Dimensions and weights
| Width | 3,410 mmcorrect |
|---|---|
| Unladen weight | 39,200 kgcorrect |
Drivetrain and chassis
| Tyre type | pneumatic tyrescorrect |
|---|
Working data
| Lifting capacity | 32,000 kgcorrect |
|---|---|
| Lift height | 6,500 mmcorrect |
| Mast type | duplexcorrect |
Other data
| Front wheels | 2correct |
|---|---|
| Load centre | 1,200.1 mmcorrect |
| Rear wheels | 2correct |
Frequently asked questions
How much does the Kalmar DCD320-12LB weigh?
The unladen weight is 39,200 kg.
What is the load capacity of the Kalmar DCD320-12LB?
Load capacity is 32,000 kg at a 1,200 mm load centre, lift height 6,500 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: forklift-international.com (retrieved August 2026) · RitchieSpecs equipment specifications (retrieved August 2026) · How we check the data
Forklift in 3D section
Turn the model, look inside and click an assembly — each one is explained.
