Start › Mini excavators › Junlian › JL50-5C

Junlian JL50-5C

Series: Junlian Mini Excavator

Source: https://osproduct.liugong.com/product/zl50cn/

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The JL50-5C from Junlian is part of the Junlian Mini Excavator series. The engine delivers 30.9 kW, with a displacement of 2,320.4 cm³. Torque is 152.1 Nm. The unladen weight is 4,510 kg. Ground clearance is 338.3 mm. The tank holds 78.4 litres. The pump delivers 120.4 l/min. The hydraulic tank holds 80.3 litres. Working pressure is 210 bar. The cooling system holds 3 litres. The oil fill is 7.2 litres. The engine fitted is the A2300. Rated output across the Junlian range ranges from 30.9 to 162 kW; the JL50-5C sits at the bottom of that range with 30.9 kW. Its immediate neighbours are the JL815 above it with 45 kW. 6 Junlian models across 2 series are on record. The model is listed under Excavators & compaction. 13 verified figures from 1 source are on file.

Technical data

Engine

Engine modelA2300correct
Power30.9 kWcorrect
Torque152.1correct
Displacement2,320.4 cm³correct
Coolant capacity3 lcorrect
Engine oil capacity7.2 lcorrect

Dimensions and weights

Ground clearance338.3correct
Unladen weight4,510 kgcorrect

Working data

Pump flow120.4 l/mincorrect
Hydraulic oil capacity80.3 lcorrect
Hydraulic pressure210 barcorrect
Fuel tank capacity78.4 lcorrect

Other data

Height2,603correct

Where this model stands

Power-to-weight ratio: 6.9 kW/t (31 kW / 4.5 t)

Stronger than 87% of the mini excavators in the register — out of 400 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Junlian JL50-5C have?

The Junlian JL50-5C delivers 30.9 kW.

How much does the Junlian JL50-5C weigh?

The unladen weight is 4,510 kg.

What engine does the Junlian JL50-5C have?

2,320 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: [1]

Mini excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare