StartMining equipmentJohn Deere › 850J WT Waste Handler

John Deere 850J WT Waste Handler Crawler

Series: 850J

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 850J WT Waste Handler from John Deere is part of the John Deere Crawler Tractor series. The engine delivers 138 kW, has 6 cylinders, with a displacement of 9,012.9 cm³. Torque is 828.4 Nm. Rated speed is 1,800 rpm. The unladen weight is 20,259.7 kg. Ground clearance is 405.4 mm. The tank holds 371 litres. Maximum torque is reached at 1,500 rpm. The pump delivers 174.1 l/min. Working pressure is 249.9 bar. The cooling system holds 34.8 litres. The oil fill is 26.5 litres. The electrical system runs on 24 V. The engine fitted is the 6090HT. The John Deere Crawler Tractor series covers 89 models. Rated output within it ranges from 31.3 to 249.8 kW; the 850J WT Waste Handler sits in the middle of that range with 138 kW. Its immediate neighbours are the 850C below it with 134.2 kW and the 850J LGP above it with 149.1 kW. 2153 John Deere models across 96 series are on record. The model is listed under Mining equipment. 18 verified figures from 1 source are on file.

Technical data

Engine

Engine model6090HTcorrect
Power138 kWcorrect
Rated speed1,800 rpmcorrect
Torque828.4correct
Speed at max. torque1,500 rpmcorrect
Cylinders6correct
Displacement9,012.9 cm³correct
AspirationTurbocharged with Aftercoolercorrect
Coolant capacity34.8 lcorrect
Engine oil capacity26.5 lcorrect

Dimensions and weights

Ground clearance405.4correct
Unladen weight20,259.7 kgcorrect

Drivetrain and chassis

Gearbox typehydrostatic transmission with direct drivecorrect
System voltage24 Vcorrect

Working data

Pump flow174.1 l/mincorrect
Hydraulic pressure249.9correct
Fuel tank capacity371 lcorrect

Other data

Height3,176correct

Where this model stands

Power-to-weight ratio: 6.8 kW/t (138 kW / 20.3 t)

Stronger than 51% of the mining equipment in the register — out of 945 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the John Deere 850J WT Waste Handler have?

The John Deere 850J WT Waste Handler delivers 138 kW.

How much does the John Deere 850J WT Waste Handler weigh?

The unladen weight is 20,260 kg.

What engine does the John Deere 850J WT Waste Handler have?

6 cylinders, 9,013 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 18 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Dump truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare