John Deere 803M
Series: Tracked Feller Buncher
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Technical data
Engine
| Engine make | John Deerecorrect |
|---|---|
| Engine model | PowerTech PSS 9.0Lcorrect |
Dimensions and weights
| Width | 3,320 mmcorrect |
|---|---|
| Ground clearance | 62.2 mmcorrect |
| Unladen weight | 28,810 kgcorrect |
Drivetrain and chassis
| Top speed | 5 km/hcorrect |
|---|
Other data
| System voltage | 24 Vcorrect |
|---|
More machines with this engine (John Deere PowerTech PSS 9.0L, 3)
Frequently asked questions
How much does the John Deere 803M weigh?
The unladen weight is 28,810 kg.
How fast does the John Deere 803M go?
Top speed is 5 km/h.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RitchieSpecs equipment specifications (retrieved August 2026) · deere.com (retrieved August 2026) · How we check the data
Forwarder in 3D section
Turn the model, look inside and click an assembly — each one is explained.
