John Deere 335C

Series: John Deere Log Loader

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 335C from John Deere is part of the John Deere Log Loader series. The engine delivers 127.1 kW, has 6 cylinders, with a displacement of 6,784.2 cm³. Rated speed is 2,200 rpm. The unladen weight is 12,020 kg. Ground clearance is 972.3 mm. The tank holds 341.1 litres. The pump delivers 560.2 l/min. The hydraulic tank holds 378.2 litres. Working pressure is 158.5 bar. The electrical system runs on 12 V. The engine fitted is the 6068T. The John Deere Log Loader series covers 7 models. Rated output within it ranges from 78.3 to 183.1 kW; the 335C sits in the middle of that range with 127.1 kW. Its immediate neighbours are the 2054 below it with 105.1 kW and the 2554 above it with 132.1 kW. 2153 John Deere models across 96 series are on record. The model is listed under Excavators & compaction. 15 verified figures from 1 source are on file.

Technical data

Engine

Engine model6068Tcorrect
Power127.1 kWcorrect
Rated speed2,200 rpmcorrect
Cylinders6correct
Displacement6,784.2 cm³correct
Aspirationturbochargedcorrect

Dimensions and weights

Width2,493.3correct
Ground clearance972.3correct
Unladen weight12,020 kgcorrect

Drivetrain and chassis

System voltage12 Vcorrect

Working data

Pump flow560.2 l/mincorrect
Hydraulic oil capacity378.2 lcorrect
Hydraulic pressure158.5correct
Fuel tank capacity341.1 lcorrect

Other data

Height4,090.4correct

Where this model stands

Power-to-weight ratio: 10.6 kW/t (127 kW / 12 t)

Stronger than 63% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the John Deere 335C have?

The John Deere 335C delivers 127 kW.

How much does the John Deere 335C weigh?

The unladen weight is 12,020 kg.

What engine does the John Deere 335C have?

6 cylinders, 6,784 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare