StartMini excavatorsJCB › 100C-1

JCB 100C-1

Series: JCB Mini Excavator

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 100C-1 from JCB is part of the JCB Mini Excavator series. The engine delivers 25 hp (16.6 kW). Rated speed is 2,100 rpm. The unladen weight is 2,867 kg. Ground clearance is 350.5 mm. The tank holds 56 litres. Maximum torque is reached at 1,800 rpm. The pump delivers 66.2 l/min. The hydraulic tank holds 71.2 litres. The cooling system holds 8.7 litres. The oil fill is 4.5 litres. The engine fitted is the 403D-I5. The JCB Mini Excavator series covers 33 models. Rated output within it ranges from 12.3 to 74.8 hp; the 100C-1 sits in the lower part of that range with 25 hp. Its immediate neighbours are the 804 Super below it with 21 hp and the 8027ZTS above it with 28.2 hp. 752 JCB models across 38 series are on record. The model is listed under Excavators & compaction. 13 verified figures from 1 source are on file.

Technical data

Engine

Engine model403D-I5correct
Power25 hp (16.6 kW)correct
Rated speed2,100 rpmcorrect
Speed at max. torque1,800 rpmcorrect
Coolant capacity8.7 lcorrect
Engine oil capacity4.5 lcorrect

Dimensions and weights

Ground clearance350.5correct
Unladen weight2,867 kgcorrect

Working data

Pump flow66.2 l/mincorrect
Hydraulic oil capacity71.2 lcorrect
Fuel tank capacity56 lcorrect

Other data

Height2,401.8correct

Where this model stands

Power-to-weight ratio: 5.8 kW/t (17 kW / 2.9 t)

Stronger than 40% of the mini excavators in the register — out of 400 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the JCB 100C-1 have?

The JCB 100C-1 delivers 25 hp.

How much does the JCB 100C-1 weigh?

The unladen weight is 2,867 kg.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Mini excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare