Technical register for agricultural, construction and commercial machinery · sourced data
StartTrucks over 7.5 tIveco › 8x4-VTA4211-PL

Iveco 8x4-VTA4211-PL

Built: 2016-2016 · Series: Stralis

More machines from model year 2016

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Stralis series from Iveco includes the 8x4-VTA4211-PL. Production: 2016. The engine delivers 412 kW, has 6 cylinders, with a displacement of 12,882 cm³. The machine is 9,285 mm long and 2,550 mm wide. The unladen weight is 13,640 kg. The gross vehicle weight is 35,000 kg. The Stralis series covers 121 models. Rated output within it ranges from 309 to 419 kW; the 8x4-VTA4211-PL sits at the top of that range with 412 kW. Its immediate neighbours are the AD320S45Y/PS-8X2 below it with 332 kW and the 570XP above it with 419 kW. 2867 Iveco models across 23 series are on record. The model is listed under Trucks over 7.5 t. 8 verified figures from 1 source are on file.

Iveco Stralis – the long-haul and distribution range 2002–2019: AD rigid chassis and AS/AT tractor unit, Cursor six-cylinder engines, 228 to 419 kW, also as a natural-gas version

The Iveco Stralis was introduced in 2002 as the successor to the EuroTech and EuroStar and built until 2019, when the S-Way took over; Iveco itself was formed in 1975 from the merger of the Fiat, OM, Lancia and Magirus-Deutz commercial-vehicle businesses. The type designation follows a fixed scheme: AD marks the rigid chassis for bodywork, AS and AT the tractor unit, the following number (190, 260, 340, 440 and so on) the weight or power class, the letters P, S and T after the slash the cab height and equipment, and Y and Z the axle configuration. The Stralis is powered by Iveco's own inline six-cylinder Cursor engines; as the Stralis NP there was also a natural-gas-powered variant, likewise recorded in the register.

Read on 3 more paragraphs

The register lists here 146 versions, with six-cylinder engines throughout, displacements of 7,790 to 12,900 cm³, outputs of 228 to 419 kW, unladen weights of 6,960 to 20,275 kg and gross weights of 11,999 to 42,000 kg; for part of the models, lengths of 6,070 to 12,490 mm are also recorded.

For a decade and a half the Stralis was the backbone of Iveco's European range in long-haul and distribution transport and a competitor to the Mercedes-Benz Actros, Scania R/P, Volvo FH and DAF XF; with the natural-gas version Iveco positioned itself early as a pioneer of alternative drives in the heavy-truck segment.

On a used example, operating hours and mileage, the condition of the clutch and automated manual gearbox, the AdBlue and exhaust system, on the NP natural-gas models the condition and inspection dates of the gas tanks, and the brakes and tyres of the drive axle all count; parts and service run through the Iveco dealer network.

Sources: Kennwerte der Modelle Iveco Stralis, Iveco (Hersteller)

Technical data

Engine

Power412 kWcorrect
Cylinders6correct
Displacement12,882 cm³correct

Dimensions and weights

Length9,285 mmcorrect
Width2,550 mmcorrect
Unladen weight13,640 kgcorrect
Gross vehicle weight35,000 kgcorrect

Where this model stands

Power-to-weight ratio: 30.2 kW/t (412 kW / 13.6 t)

Stronger than 92% of the trucks over 7.5 t in the register — out of 25,425 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Iveco 8x4-VTA4211-PL have?

The Iveco 8x4-VTA4211-PL delivers 412 kW.

How much does the Iveco 8x4-VTA4211-PL weigh?

The unladen weight is 13,640 kg.

What is the gross vehicle weight of the Iveco 8x4-VTA4211-PL?

35,000 kg.

What engine does the Iveco 8x4-VTA4211-PL have?

6 cylinders, 12,882 cm³ displacement.

What are the dimensions of the Iveco 8x4-VTA4211-PL?

9,285 mm × 2,550 mm.

When was the Iveco 8x4-VTA4211-PL built?

Production years: 2016.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare