Iveco ML100E18/P
Built: 2006-2009 · Series: ML100E18
More machines from model year 2006
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Iveco EuroCargo ML100E18 – distribution truck in the 10-tonne class: four- or six-cylinder 3,920cc engine, unladen weight 4.7 to 8.1 tonnes, gross vehicle weight up to 10 tonnes
The ML100E18 is the 10-tonne version of the Iveco EuroCargo range, built at the same Brescia plant as the lighter ML75E18; ML marks the medium-weight range, E the Euro emissions stage. The register lists, besides the base version, the EEV variant, the ML100E18/75 combination and the ML100E18/P with and without EEV marking. Like the ML75E18, the ML100E18 belonged until 2022 to the model line-up of the then CNH Industrial group, from which today's independent Iveco Group emerged.
Read on 3 more paragraphs
The register lists 5 versions with 3,920cc displacement, four to six cylinders, unladen weights from 4,670 to 8,140kg, gross vehicle weights from 7,490 to 10,000kg, lengths from 8,200 to 10,250mm and widths from 2,410 to 2,570mm.
In the 10-tonne class the ML100E18 serves as a distribution truck for regional and urban logistics, often with box body, tail-lift, or as a base for rental fleets; it sits between the light 7.5-tonners and the heavier ranges above 12 tonnes. Rental companies value this class for combining a manoeuvrable chassis with comparatively high payload.
Buying used, check the frame for rust, the condition of the tail-lift, the timing chain or belt and exhaust aftertreatment of the engine, the clutch and gearbox, the brakes, and – depending on version – the condition of the six-cylinder unit against the four-cylinder variant; spare parts run through the Iveco network. The tightness of the cab and the condition of the tow hitch, where fitted, are also worth checking.
Sources: Kennwerte der Modelle Iveco ML100E18, Iveco (Hersteller)
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 3,920 cm³correct |
Dimensions and weights
| Length | 8,440 mmcorrect |
|---|---|
| Width | 2,460 mmcorrect |
| Wheelbase | 4,460 mmcorrect |
| Unladen weight | 4,670 kgcorrect |
| Gross vehicle weight | 10,000 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Iveco ML100E18/P weigh?
The unladen weight is 4,670 kg.
What is the gross vehicle weight of the Iveco ML100E18/P?
10,000 kg.
What engine does the Iveco ML100E18/P have?
4 cylinders, 3,920 cm³ displacement.
What are the dimensions of the Iveco ML100E18/P?
8,440 mm × 2,460 mm.
When was the Iveco ML100E18/P built?
Production years: 2006-2009.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.