Technical register for agricultural, construction and commercial machinery · sourced data
StartTrucks over 7.5 tIveco › 45C17D/P

Iveco 45C17D/P

Built: 2011-2011 · Series: Trucks up to 3.5 t (Class N1)

More machines from model year 2011

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Iveco 45C17D/P is a machine built by Iveco. Production: 2011. The engine has 4 cylinders, with a displacement of 2,998 cm³. The machine is 2,200 mm wide. The unladen weight is 1,915 kg. The wheelbase measures 3,750 mm. The gross vehicle weight is 3,500 kg. The machine runs on 4 wheels. Unladen weight across the Iveco range ranges from 1,450 to 34,300 kg; the 45C17D/P sits at the bottom of that range with 1,915 kg. Its immediate neighbours are the DAILY 29L11 below it with 1,910 kg and the 35S12A/P above it with 1,917 kg. 2867 Iveco models across 23 series are on record. The model is listed under Trucks over 7.5 t. 9 verified figures from 1 source are on file.

Iveco trucks up to 3.5 t (class N1) – collective page of the Iveco Daily: type logic 35C to 40C by weight class, van (V), combi (S) and chassis (C) versions, engines from 85 to 150 kW, Euro 4 to EEV emission stages

The EU vehicle class N1 covers trucks and vans up to 3.5 t gross vehicle weight; this page is a collective page built from registration data (Netherlands, Finland) bundling every Iveco range recorded in that class, which consists almost entirely of the Daily, built since 1978. The type logic reads from the code: the first two digits (35, 38, 40) denote the weight class in hundreds of kilograms, the letter the body – C for chassis-cab, V for panel van, S for the combi/bus version – followed often by the emission stage such as Euro 4, Euro V HD EEV, or CNG for gas models. Iveco was formed in 1975 in Turin from the merger of the commercial-vehicle divisions of Fiat, OM, Lancia, Unic and Magirus-Deutz.

Read on 3 more paragraphs

The register lists 131 versions with kerb weights of 1,450 to 3,395 kg and gross vehicle weights of 3,450 to 3,500 kg. Engine outputs are recorded for 19 models and range from 85 to 150 kW, displacements from 2,286 to 3,000 cm³ across 4 to 6 cylinders; width runs from 1,850 to 2,360 mm, and lengths are recorded for 67 models, from 4,580 to 8,020 mm.

The Daily has for decades been the reference in the 3.5-tonne van segment with a ladder frame and rear-wheel drive, setting it apart from unibody competitors such as the Ford Transit or Mercedes-Benz Sprinter and making it especially sought after for conversions such as motorhomes, refrigerated vehicles and flatbeds; the CNG versions address chiefly the environmental requirements of urban distribution traffic.

On a used example, what matters is the condition of the ladder frame, wear of the rear leaf springs, the turbocharger and injection system of the HPI/HPT diesel engines, and on CNG models the condition of the gas tanks and their inspection deadlines. Spare parts are readily available through the dense Iveco service network; chassis-cab versions with special bodies are worth checking for the body's registration.

Sources: Kennwerte der Modelle Iveco Lkw bis 3,5 t (Klasse N1), Iveco (Hersteller)

Technical data

Engine

Cylinders4correct
Displacement2,998 cm³correct

Dimensions and weights

Width2,200 mmcorrect
Wheelbase3,750 mmcorrect
Unladen weight1,915 kgcorrect
Gross vehicle weight3,500 kgcorrect

Drivetrain and chassis

Wheels4correct

Frequently asked questions

How much does the Iveco 45C17D/P weigh?

The unladen weight is 1,915 kg.

What is the gross vehicle weight of the Iveco 45C17D/P?

3,500 kg.

What engine does the Iveco 45C17D/P have?

4 cylinders, 2,998 cm³ displacement.

When was the Iveco 45C17D/P built?

Production years: 2011.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare