Start › Screening & crusher buckets › ITALMEK › IF40

ITALMEK IF40

Series: IF CPV

Source: https://www.italmek.com/prodotti/rotating-crusher/

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The ITALMEK IF40 is an attachment in the Screening & crusher buckets category. It is a screening or crusher bucket used to screen, separate and crush bulk material. It belongs to the IF CPV series. The equipment type is Rotating concrete crusher. It fits carrier machines from 30 to 50 tonnes operating weight. The unladen weight is 3,900 kg. The figures come from the manufacturer's data sheet and describe the base configuration; other equipment variants are possible. Unladen weight across the ITALMEK range ranges from 320 to 7,450 kg; the IF40 sits in the middle of that range with 3,900 kg. Its immediate neighbours are the IC38 below it with 3,750 kg and the ITC65 above it with 6,500 kg. 81 ITALMEK models across 10 series are on record. The model is listed under Screening & crusher buckets. 4 verified figures from 2 sources are on file.

Technical data

Dimensions and weights

Unladen weight3,900correct

Other data

Carrier max.50correct
Carrier min.30correct

Frequently asked questions

How much does the ITALMEK IF40 weigh?

The unladen weight is 3,900 kg.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 4 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

IF16

IF20

IF23

IF30

IF60

Sources: [1] [2]

Wheel loader in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare