Start › Screening & crusher buckets › ITALMEK › IF35

ITALMEK IF35

Series: IF

Source: https://xn--80aknyc0cxa.xn--p1ai/product/italmek-if25/?share

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The ITALMEK IF35 is part of the Screening & crusher buckets category from ITALMEK. It is a screening or crusher bucket used to screen, separate and crush bulk material. The equipment type is Rotating concrete crusher. It fits carrier machines from 32 to 45 tonnes operating weight. The unladen weight is 3,600 kg. The figures come from the manufacturer's data sheet and describe the base configuration; other equipment variants are possible. Unladen weight across the ITALMEK range ranges from 320 to 7,450 kg; the IF35 sits in the middle of that range with 3,600 kg. Its immediate neighbours are the IRC35 below it with 3,500 kg and the ITC40 above it with 3,700 kg. 81 ITALMEK models across 10 series are on record. The model is listed under Screening & crusher buckets. 4 verified figures from 2 sources are on file.

Technical data

Dimensions and weights

Unladen weight3,600correct

Other data

Carrier max.45correct
Carrier min.32correct

Frequently asked questions

How much does the ITALMEK IF35 weigh?

The unladen weight is 3,600 kg.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 4 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

IF10

IF15

IF18

IF21

IF25

IF5

IF55

Sources: [1] [2]

Wheel loader in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare