Technical register for agricultural, construction and commercial machinery · sourced data
Scanner Parts Sign in
Start › Shears & pulverisers › ITALMEK › IC38

ITALMEK IC38

Series: IC

Source: https://www.italmek.com/prodotto/steel-scrap-shear-ic38/

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The ITALMEK IC38 is an attachment in the Shears & pulverisers category. It is a shear or pulveriser used to cut and crush reinforced concrete and steel. The equipment type is Scrap shear. It fits carrier machines from 32 to 47 tonnes operating weight. The unladen weight is 3,750 kg. The figures come from the manufacturer's data sheet and describe the base configuration; other equipment variants are possible. The IC series covers 15 models. Unladen weight within it ranges from 2,300 to 7,450 kg; the IC38 sits in the lower part of that range with 3,750 kg. Its immediate neighbours are the IC25 XP below it with 2,950 kg and the IC71 above it with 7,450 kg. 81 ITALMEK models across 10 series are on record. The model is listed under Shears & pulverisers. 4 verified figures from 2 sources are on file.

Technical data

Dimensions and weights

Unladen weight3,750correct

Other data

Carrier max.47correct
Carrier min.32correct

Frequently asked questions

How much does the ITALMEK IC38 weigh?

The unladen weight is 3,750 kg.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 4 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

IC1.8

IC10

IC15

IC18

IC2

IC23

IC25 XP

IC3.5

IC46

IC5

IC54

IC7

Sources: [1] [2]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare