Iseki TM3200 HST 4WD
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
As a tractor, the Iseki TM3200 HST belongs to the Iseki 4WD Tractor series. 14.5 kW is what the three-cylinder engine gets out of 1.1 litres. Rated power is reached at 2,500 rpm.
At 19 km/h, that is as fast as it goes. Empty, it weighs 670 kg.
Within the range, rated power spans from 11.6 to 83.5 kW; with 14.5 kW, the TM3200 HST sits at the bottom end. Directly alongside are the TM3160 with 11.6 kW below and the TM3240 HST with 16.4 kW above.
Technical data
Engine
| Power | 14.5 kWcorrect |
|---|---|
| Rated speed | 2,500 rpmcorrect |
| Cylinders | 3correct |
| Displacement | 1,124.2 cm³correct |
Dimensions and weights
| Ground clearance | 245.1correct |
|---|---|
| Unladen weight | 670 kgcorrect |
Drivetrain and chassis
| Tyre size | Front 5.00-12, Rear 8-18correct |
|---|---|
| Top speed | 19.2 km/hcorrect |
Working data
| Pump flow | 20.1 l/mincorrect |
|---|---|
| Fuel tank capacity | 25.4 lcorrect |
Where this model stands
Power-to-weight ratio: 21.6 kW/t (14 kW / 0.7 t)
Power class: Compact (< 40 hp)
Stronger than 7% of the tractors in the register — out of 15,240 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Iseki TM3200 HST have?
The Iseki TM3200 HST delivers 14.5 kW.
How much does the Iseki TM3200 HST weigh?
The unladen weight is 670 kg.
What engine does the Iseki TM3200 HST have?
3 cylinders, 1,124 cm³ displacement.
How fast does the Iseki TM3200 HST go?
Top speed is 19.2 km/h.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.