Iseki TH4260 Mech 4WD
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
As a tractor, the Iseki TH4260 Mech belongs to the Iseki 4WD Tractor series. 17.9 kW is what the three-cylinder engine gets out of 1.4 litres. Rated power is reached at 2,500 rpm.
It will not go faster than 22 km/h — a working pace, not a travelling one. Unladen, it tips the scales at 955 kg.
Within the range, rated power spans from 11.6 to 83.5 kW; with 17.9 kW, the TH4260 Mech sits in the lower third. Directly alongside are the TXG23 with 16.6 kW below and the TF327 with 20.9 kW above.
Technical data
Engine
| Power | 17.9 kWcorrect |
|---|---|
| Rated speed | 2,500 rpmcorrect |
| Cylinders | 3correct |
| Displacement | 1,430.6 cm³correct |
Dimensions and weights
| Ground clearance | 195.1correct |
|---|---|
| Unladen weight | 955 kgcorrect |
Drivetrain and chassis
| Forward gears | 9correct |
|---|---|
| Reverse gears | 3correct |
| Tyre size | Front 7-14, Rear 9.5-24correct |
| Top speed | 22.2 km/hcorrect |
Working data
| Pump flow | 28 l/mincorrect |
|---|---|
| Fuel tank capacity | 23.1 lcorrect |
Where this model stands
Power-to-weight ratio: 18.7 kW/t (18 kW / 1 t)
Power class: Compact (< 40 hp)
Stronger than 11% of the tractors in the register — out of 15,240 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Iseki TH4260 Mech have?
The Iseki TH4260 Mech delivers 17.9 kW.
How much does the Iseki TH4260 Mech weigh?
The unladen weight is 955 kg.
What engine does the Iseki TH4260 Mech have?
3 cylinders, 1,431 cm³ displacement.
How fast does the Iseki TH4260 Mech go?
Top speed is 22.2 km/h.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.