StartTractorsIseki › TG5330

Iseki TG5330 4WD

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Iseki TG5330 is a tractor made by Iseki. 23.9 kW is what the three-cylinder engine gets out of 1.5 litres. Rated power is reached at 2,600 rpm.

It runs with MFWD. At 30 km/h, that is as fast as it goes. Empty, it weighs 1,305 kg.

It runs on diesel; the engine is water-cooled. Within the range, rated power spans from 7.5 to 63 kW; with 23.9 kW, the TG5330 sits in the mid-field. Directly alongside are the TH4330FH with 23.5 kW below and the TL3201 with 24 kW above.

Technical data

Engine

Fueldieselcorrect
Power32 hp (23.9 kW)correct
Rated speed2,600 rpmcorrect
Cylinders3correct
Displacement1,499.4 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Length3,140 mmcorrect
Ground clearance420.1correct
Unladen weight1,305 kgcorrect

Drivetrain and chassis

Driveselectable four-wheel drivecorrect
Forward gears12correct
Reverse gears12correct
Tyre sizeFront 7-16, Rear 12.4-24correct
Top speed29.9 km/hcorrect

Working data

Pump flow34.4 l/mincorrect
Fuel tank capacity40.1 lcorrect

Origin and approval

PlantJapancorrect

Other data

Cab height2,572.5correct

Where this model stands

Power-to-weight ratio: 18.3 kW/t (24 kW / 1.3 t)

Power class: Compact (< 40 hp)

Stronger than 20% of the tractors in the register — out of 15,143 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Iseki TG5330 have?

The Iseki TG5330 delivers 32 hp.

How much does the Iseki TG5330 weigh?

The unladen weight is 1,305 kg.

What engine does the Iseki TG5330 have?

3 cylinders, 1,499 cm³ displacement, diesel.

How fast does the Iseki TG5330 go?

Top speed is 29.9 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 20 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare