Invertek 132
Series: Other models
The photo shows the IMP-80K-2 from the same series.
Source: https://www.invertek.cz/o-nas
Invertek lists the 132 as a three-phase induction motor. The rated output is 3 kW. The motor is six-pole, which at 50 Hz gives a synchronous speed of 1,000 rpm. The rated voltage is 415 V. The housing is frame size 132 S in foot-mounted form. The protection class is IP55. The efficiency is 88 per cent at full load, 89 per cent at 75 per cent load and 88 per cent at half load. The motor weighs 63 kg. At full load it delivers 30.03 Nm. Mounting arrangements to IEC 60034-7: B3, B35, B34, B5 and B14. The motor is built in China. The values are recorded in the Australian MEPS registration under standard AS/NZS 1359.5:2004; measured to AS/NZS 1359.102.3:2000. Rated output across the Invertek range ranges from 0.75 to 160 kW; the 132 sits at the bottom of that range with 3 kW. Its immediate neighbours are the IMPA-90L-2 below it with 2.2 kW and the IM-112M-4 above it with 4 kW. 91 Invertek models are on record. The model is listed under Electric motors. 25 verified figures from 1 source are on file.
Technical data
Engine
| Rated output | 3 kWcorrect |
|---|
Dimensions and weights
| Weight | 63 kgcorrect |
|---|
Electrical data
| Rated voltage | 415 Vcorrect |
|---|---|
| Number of poles | 6correct |
| Protection class | IP55correct |
| Frame size | 132 S (foot)correct |
| Mounting (IEC 60034-7) | B3, B35, B34, B5, B14correct |
| Efficiency at full load | 88 %correct |
| Efficiency at 75 % load | 89 %correct |
| Efficiency at half load | 88 %correct |
Origin and approval
| Country of manufacture | Chinacorrect |
|---|
Other data
| Standard applied | AS/NZS 1359.5:2004correct |
|---|---|
| Test method | AS/NZS 1359.102.3:2000correct |
Frequently asked questions
How much power does the Invertek 132 have?
The Invertek 132 delivers 3 kW.
What to check before buying
- Match the data plate against the order: frame size, mounting and rating have to agree.
- Check the ingress rating against the installation site — outdoors or in dust the demands differ.
- Hold the mounting form and dimensions against the existing seat before ordering.
- The pole count sets the speed — when replacing an older unit, compare this first.
- For used units, ask about winding condition and bearing play.
- Ask about parts availability for this series — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 25 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Electric motor in 3D section
Turn the model, look inside and click an assembly — each one is explained.