International Harvester International 2544
Built: 1968-1973 · Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The International Harvester International 2544 is a tractor built in 1968-1973. It runs on a four-cylinder engine. Rated power is reached at 2,200 rpm.
Power is transmitted through a 5-speed sliding gear with forward-reverse shuttle gearbox, drive type: 2-WD.
It runs on petrol; the engine is water-cooled. As standard, it runs on 7.50-16 10-ply standard tyres at the front and 14.9-24 6-ply standard at the rear. The predecessor was the International 2504.
Technical data
Engine
| Engine make | Internationalcorrect |
|---|---|
| Engine model | C-200correct |
| Fuel | petrolcorrect |
| Power | 66 gross, 60 net, 53 pto, 46 drawbar hpcorrect |
| Rated speed | 2,200 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 200 cicorrect |
| Bore | 3.813"correct |
| Stroke | 4.3875"correct |
| Naturally aspirated | naturally aspiratedcorrect |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 138"correct |
|---|---|
| Height | 59"correct |
| Wheelbase | 73"correct |
| Unladen weight | 4,930 lbcorrect |
Drivetrain and chassis
| Drive | rear-wheel drivecorrect |
|---|---|
| Gearbox | 5-speed sliding-gear transmission with forward-reverse shuttlecorrect |
| Gearbox make | Internationalcorrect |
| Forward gears | 5correct |
| Reverse gears | 5correct |
| Front tyres | 7.50-16 10-ply standardcorrect |
| Rear tyres | 14.9-24 6-ply standardcorrect |
Origin and approval
| Plant | USAcorrect |
|---|---|
| Predecessor | International 2504correct |
Frequently asked questions
What engine does the International Harvester International 2544 have?
4 cylinders, gasoline.
When was the International Harvester International 2544 built?
Production years: 1968-1973.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 26 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.