Ingersoll Rand PT125R

Series: Ingersoll Rand Pneumatic Roller

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Ingersoll Rand PT125R is a model in the Ingersoll Rand Pneumatic Roller series. The engine delivers 87.2 hp (64.1 kW). The wheelbase measures 2,923 mm. The tank holds 379.3 litres. The hydraulic tank holds 61.3 litres. The electrical system runs on 12 V. The engine fitted is the B 3,3T-85. Rated output across the Ingersoll Rand range ranges from 16.3 to 207.8 hp; the PT125R sits in the lower part of that range with 87.2 hp. Its immediate neighbours are the BL570 below it with 56.8 hp and the PT240R above it with 100.4 hp. 271 Ingersoll Rand models across 12 series are on record. The model is listed under Road construction. 8 verified figures from 1 source are on file.

Technical data

Engine

Engine modelB 3.3T-85correct
Power87.2 hp (64.1 kW)correct

Dimensions and weights

Width1,981.2correct
Wheelbase2,923correct

Drivetrain and chassis

System voltage12 Vcorrect

Working data

Hydraulic oil capacity61.3 lcorrect
Fuel tank capacity379.3 lcorrect

Frequently asked questions

How much power does the Ingersoll Rand PT125R have?

The Ingersoll Rand PT125R delivers 87.2 hp.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Asphalt paver in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare