Start › Road construction › Ingersoll Rand › DD10ST

Ingersoll Rand DD10ST

Series: Ingersoll Rand Static Smooth Drum Roller

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Ingersoll Rand DD10ST belongs to the Ingersoll Rand Static Smooth Drum Roller series. The engine delivers 20.3 hp (14.9 kW). Top speed is 9.8 km/h. The tank holds 11.4 litres. The electrical system runs on 12 V. The engine fitted is the GX620. Rated output across the Ingersoll Rand range ranges from 16.3 to 207.8 hp; the DD10ST sits at the bottom of that range with 20.3 hp. Its immediate neighbours are the DD16 below it with 17.1 hp and the DD30 above it with 33.3 hp. 271 Ingersoll Rand models across 12 series are on record. The model is listed under Road construction. 7 verified figures from 1 source are on file.

Technical data

Engine

Engine modelGX620correct
Power20.3 hp (14.9 kW)correct

Dimensions and weights

Width1,066.8correct

Drivetrain and chassis

Top speed9.8 km/hcorrect
System voltage12 Vcorrect

Working data

Fuel tank capacity11.4 lcorrect

Frequently asked questions

How much power does the Ingersoll Rand DD10ST have?

The Ingersoll Rand DD10ST delivers 20.3 hp.

How fast does the Ingersoll Rand DD10ST go?

Top speed is 9.8 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: [1]

Asphalt paver in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare