Technical register for agricultural, construction and commercial machinery · sourced data
Start › Vans › Ihc › SCOUT 11

Ihc SCOUT 11

Built: 1978-1978 · Series: Other models

More machines from model year 1978

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The SCOUT 11 comes from Ihc. Production: 1978. The engine has 8 cylinders. The machine is 1,810 mm wide. The unladen weight is 1,926 kg. The wheelbase measures 2,540 mm. The gross vehicle weight is 2,500 kg. The machine runs on 4 wheels. Unladen weight across the Ihc range ranges from 1,085 to 3,950 kg; the SCOUT 11 sits in the lower part of that range with 1,926 kg. Its immediate neighbours are the I 12 G below it with 1,850 kg and the 1046 above it with 3,950 kg. 9 Ihc models across 6 series are on record.

IHC – other models: KB 2 and Scout 11 from International Harvester (Chicago), six- to eight-cylinder engines up to 3,500 cc, kerb weight 1,410 to 1,926 kg

IHC stands for International Harvester Company, the commercial-vehicle and farm-equipment maker based in Chicago. This collective page lists two models of the marque: the KB 2 from the KB series of light trucks, and the Scout, listed here as the Scout 11 version – the compact off-roader with which International Harvester competed against Jeep and later rivals from the 1960s onward.

Read on 3 more paragraphs

The register lists 2 versions with an engine of up to 3,500 cc, six to eight cylinders, kerb weights of 1,410 to 1,926 kg, gross vehicle weights of 2,035 to 2,500 kg and widths of 1,800 to 1,810 mm.

The KB 2 handled light to medium-duty haulage for farmers, tradespeople and small haulage firms, while the Scout, as one of the first compact off-roaders on the market, was used in both agricultural and civilian recreational use. Both lines reflect the broad range with which International Harvester was represented in the commercial-vehicle and off-road segment alongside tractors and harvesters.

When buying these older vehicles, key points are corrosion on the frame, wings and load bed or body, the condition of the clutch and gearbox, and the function of the braking system and axles. Spare parts for the engine and drivetrain are available through dealers specialising in International Harvester and Scout as well as the classic-vehicle trade; the manufacturer's own distribution network no longer exists.

Sources: Kennwerte der Modelle IHC (weitere Modelle)

Technical data

Engine

Cylinders8correct

Dimensions and weights

Width1,810 mmcorrect
Wheelbase2,540 mmcorrect
Unladen weight1,926 kgcorrect
Gross vehicle weight2,500 kgcorrect

Drivetrain and chassis

Wheels4correct

Frequently asked questions

How much does the Ihc SCOUT 11 weigh?

The unladen weight is 1,926 kg.

What is the gross vehicle weight of the Ihc SCOUT 11?

2,500 kg.

What engine does the Ihc SCOUT 11 have?

8 cylinders.

When was the Ihc SCOUT 11 built?

Production years: 1978.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Van in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare