Huffermann HSA18.70LS
Built: 2010-2010 · Series: Other models
More machines from model year 2010
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Huffermann – other models: German hooklift and skip-loader vehicles outside the named ranges, HKA, HMA, HPA, HRA, HSA, HSF, HSK, HTA, HTM, HTSA and LBA type series, 2.3 to 10.4 t unladen weight
This page gathers the Huffermann vehicles the register could not assign to a named range. Huffermann Fahrzeugbau is a German manufacturer of skip loaders, hooklift equipment and swap-body systems for container and skip transport; the model list reflects this in the numerous HKA, HMA, HPA, HRA, HSA, HSF, HSK, HTA, HTM, HTSA and LBA type series, each followed by a multi-digit type number.
Read on 3 more paragraphs
The register lists 31 versions here with unladen weights from 2,300 to 10,360 kg and gross vehicle weights from 12,000 to 47,000 kg. Lengths run from 5,050 to 15,250 mm, widths from 2,260 to 2,550 mm.
Hooklift and skip-loader vehicles of this kind serve the waste management industry, construction sites and municipal fleets, where they swap containers and skips, competing with other German builders of roll-off and skip-loader systems.
When buying used, this vehicle class calls for checking the condition of the hook arm, rollers and hydraulic rams, corrosion on the frame and mounting brackets, the function of the locking mechanism, and the brake system and overrun coupling; on heavily used vehicles the wear on the slide rails says a great deal about prior service. Spare parts come through the manufacturer and workshops specialising in hooklift technology.
Technical data
Dimensions and weights
| Length | 9,430 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 5,170 mmcorrect |
| Unladen weight | 3,414 kgcorrect |
| Gross vehicle weight | 20,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Huffermann HSA18.70LS weigh?
The unladen weight is 3,414 kg.
What is the gross vehicle weight of the Huffermann HSA18.70LS?
20,000 kg.
Up to what speed is the Huffermann HSA18.70LS approved?
Approved up to 100 km/h.
What are the dimensions of the Huffermann HSA18.70LS?
9,430 mm × 2,550 mm.
When was the Huffermann HSA18.70LS built?
Production years: 2010.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
-
HAR2470
HKA 1870
HKA1870
HMA24.24
HMA2424
HMA30.10L
HPA 20 72
HPA 24.72
HPA 24.72 L
HPA 30.80L
HRA4212
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.