Hrd S CON 2Z
Built: 2009-2009 · Series: Other models
More machines from model year 2009
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
HRD – other models: the collective page of trailers and semi-trailers from the Dutch manufacturer outside the named ranges, lengths from 5,070 to 19,850 mm, gross weight up to 64,000 kg
This page gathers trailers and semi-trailers of the Dutch brand HRD that the register could not assign to a named range. HRD is one of the Dutch semi-trailer builders for curtainsider and low-bed bodies; model names such as NTL, NTS, NTZ or Jumbo Semitrailer in the holdings point to extended or lowerable semi-trailers for bulky loads, while the low-loader versions serve machinery transport.
Read on 3 more paragraphs
The register lists here 121 versions with unladen weights from 1,120 to 17,510 kg, gross weights from 1,300 to 64,000 kg, lengths from 5,070 to 19,850 mm and widths from 2,100 to 2,750 mm.
The wide span in length and weight shows the breadth of HRD's range: from the compact trailer to the jumbo semi-trailer for light-freight long-haul and low-bed trailers for construction machinery, placing the brand in the same segment as Krone, Kögel or Broshuis (represented in the holdings as BROSHUIS NTG).
When buying used, what counts is the condition of the frame and chassis rails, axles and braking system (ABS/EBS), the condition of the curtain including its roof mechanism or, on low-loaders, the ramps and hydraulics, the operation of the landing legs and kingpin, and complete inspection records; on the jumbo versions, additionally the condition of the lowering axle and its hydraulic seals.
Technical data
Dimensions and weights
| Length | 10,240 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 6,240 mmcorrect |
| Unladen weight | 4,390 kgcorrect |
| Gross vehicle weight | 38,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Hrd S CON 2Z weigh?
The unladen weight is 4,390 kg.
What is the gross vehicle weight of the Hrd S CON 2Z?
38,000 kg.
Up to what speed is the Hrd S CON 2Z approved?
Approved up to 100 km/h.
What are the dimensions of the Hrd S CON 2Z?
10,240 mm × 2,550 mm.
When was the Hrd S CON 2Z built?
Production years: 2009.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.