Holder C500
Built: 1983-1983 · Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Holder Gmbh C500 is a tractor built in 1983. Power comes from a three-cylinder engine; from 2.4 litres it draws 37 kW.
Length is 3.65 m. Empty, it weighs 1,970 kg.
Within the range, rated power spans from 9 to 80 kW; with 37 kW, the C500 sits in the mid-field. Directly alongside are the C250 with 36.5 kW below and the C 55 SC with 42 kW above.
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 37 kWcorrect |
| Rated speed | 2.500/mincorrect |
| Cylinders | 3correct |
| Cylinders | 3 Hubraumcorrect |
| Displacement | 2,350 cm³correct |
Dimensions and weights
| Length | 3,650 mmcorrect |
|---|---|
| Unladen weight | 1,970 kgcorrect |
| Gross vehicle weight | 3,000 kgcorrect |
Other data
| Antrieb antriebstyp | all-wheel drivecorrect |
|---|---|
| Batterie | 12 Vcorrect |
| Bauweise | Blockbauweisecorrect |
| Bereifungbearbeiten standard | 10, 5/correct |
| Betriebsbremse | Wirktcorrect |
| Bodenfreiheit | 240 mmcorrect |
| Breite | 1.198 mmcorrect |
| Drehstromgenerator anlasser | Schubschraubtriebcorrect |
| Füllmengenbearbeiten kraftstoff | 40, 00 Lcorrect |
| Getriebe | 8 Vcorrect |
| Getriebe hinten | 10, 25 Lcorrect |
| Getriebe vorne | 6, 25 Lcorrect |
| Hinterräder feststellbremse | Wiecorrect |
| Hydraulik | 14, 00 Lcorrect |
| Höchstgeschwindigkeit | 27, 5 km/hcorrect |
| Höhe | 2.060 mmcorrect |
| Kabinenbreite | 1.100 mmcorrect |
| Kupplungbearbeiten fahrkupplung | Einscheibenkupplungcorrect |
| Kühlsystem | Wassercorrect |
| Kühlungsystem | 9, 00 Lcorrect |
| Länge | 4.000 mmcorrect |
| Maße eigengewicht | 2.120 kgcorrect |
| Motor m. filter | 6, 00 Lcorrect |
| Motor nennleistung | 37 kWcorrect |
| Motorumdrehungen heck | 1.000 Upmcorrect |
| Produktionszeitraum | 1,981correct |
| Radstand | 1.754 mmcorrect |
| Rückwärtsgänge gruppengetriebe | Schnellcorrect |
| Spurweite | 924 mmcorrect |
| Wahlweise | 400correct |
| Wenderadius ohne lenkbremse | 2.825 mmcorrect |
| Zapfwellebearbeiten front | 1.000 Upmcorrect |
| Zapfwellenkupplung | Lamellen-Naßkupplungcorrect |
Where this model stands
Power-to-weight ratio: 18.8 kW/t (37 kW / 2 t)
Power class: Universal (40–100 hp)
Stronger than 36% of the tractors in the register — out of 15,240 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Holder C500 have?
The Holder C500 delivers 37 kW.
How much does the Holder C500 weigh?
The unladen weight is 1,970 kg.
What is the gross vehicle weight of the Holder C500?
3,000 kg.
What engine does the Holder C500 have?
3 cylinders, 2,350 cm³ displacement, Diesel.
When was the Holder C500 built?
Production years: 1983.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 43 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.