Hitachi ZX210F-3
Series: Hitachi Harvester
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Technical data
Engine
| Engine model | AI-4HK1Xcorrect |
|---|---|
| Power | 164.1 kWcorrect |
| Rated speed | 2,000 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 5,101.3 cm³correct |
| Aspiration | Turbocharged, air-to-air charge-air coolercorrect |
| Coolant capacity | 26.1 lcorrect |
| Engine oil capacity | 23.1 lcorrect |
Dimensions and weights
| Unladen weight | 26,659.9 kgcorrect |
|---|
Drivetrain and chassis
| Top speed | 3.2 km/hcorrect |
|---|
Working data
| Hydraulic oil capacity | 244.2 lcorrect |
|---|---|
| Fuel tank capacity | 1,049.3 lcorrect |
Where this model stands
Power-to-weight ratio: 6.2 kW/t (164 kW / 26.7 t)
Stronger than 57% of the harvesting machinery in the register — out of 284 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Hitachi ZX210F-3 have?
The Hitachi ZX210F-3 delivers 164 kW.
How much does the Hitachi ZX210F-3 weigh?
The unladen weight is 26,660 kg.
What engine does the Hitachi ZX210F-3 have?
4 cylinders, 5,101 cm³ displacement.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: [1]
Combine harvester in 3D section
Turn the model, look inside and click an assembly — each one is explained.