Start › Electric motors › Hengshui › YX3-132S-4-B35

Hengshui YX3-132S-4-B35

Series: Other models

The photo shows the 90L-4-B3/B14 from the same series. Source: https://www.kleinanzeigen.de/s-anzeige/elektromotor-b3-b5-od

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The YX3-132S-4-B35 from Hengshui is a three-phase induction motor. The rated output is 5.5 kW. The motor is four-pole, which at 50 Hz gives a synchronous speed of 1,500 rpm. The rated voltage is 400 V. The housing is frame size 132 S in foot-mounted form. The protection class is IP55. The efficiency is 89.5 per cent at full load, 89.4 per cent at 75 per cent load and 81.2 per cent at half load. At full load it delivers 36.5 Nm. The mounting arrangement to IEC 60034-7 is B35. The motor is built in China. The values are recorded in the Australian MEPS registration under standard AS/NZS 1359.5:2004; measured to AS 1359.102.1:1997. Rated output across the Hengshui range ranges from 0.75 to 55 kW; the YX3-132S-4-B35 sits at the bottom of that range with 5.5 kW. Its immediate neighbours are the 112M-4-B35 below it with 4 kW and the 132M-4-B35 above it with 7.5 kW. 21 Hengshui models are on record. The model is listed under Electric motors. 23 verified figures from 1 source are on file.

Technical data

Engine

Rated output5.5 kWcorrect

Electrical data

Rated voltage400 Vcorrect
Number of poles4correct
Protection classIP55correct
Frame size132 S (foot)correct
Mounting (IEC 60034-7)B35correct
Efficiency at full load89.5 %correct
Efficiency at 75 % load89.4 %correct
Efficiency at half load81.2 %correct

Origin and approval

Country of manufactureChinacorrect
Standard appliedAS/NZS 1359.5:2004correct
Test methodAS 1359.102.1:1997correct

Frequently asked questions

How much power does the Hengshui YX3-132S-4-B35 have?

The Hengshui YX3-132S-4-B35 delivers 5.5 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 23 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

100L1-4-B35

100L2-4-B35

112M-4-B35

132M-4-B35

160L-4-B35

180L-4-B35

200L-4-B35

80M2-4-B3/B14

80M2-4-B35

90L-4-B3/B14

90L-4-B35

YX3-132M-4-B35

Sources: [1]

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare